Abstract:This study investigated the collective evolution of martensite variant structures, the development of crystallographic textures and the load partitioning among the variants during tensile deformation in a commercial polycrystalline NiTi wire by means of in-situ high-energy X-ray diffraction technique. The cold-worked and then crystallized NiTi wire was found to have three fiber textures along the wire axial direction in its thermally formed self-accommodating B19′ martensite, including (<math>1¯</math>20)/(120), (<math>1¯</math>02) and (102). These textural orientations are inheritance of the texture of the B2 phase and are associated with the <011> type II twins and (001) compound twins. Tensile deformation via martensite variant reorientation converted the (102) and (120) fiber textures into (<math>1¯</math>02). The texture evolutions and variant selections are driven by the difference in d-spacing values between the pairing variants in each twin structure in order to achieve maximum elongation deformation in the tensile loading direction. At the meantime, the lattice strains of the favored variants increased whereas those of the unfavored variants decreased (even to negative) abruptly at the occurrence of the Lüders deformation event when at the global stress remained constant over the stress plateau. These changes of the lattice strains are attributed to load transfer and repartitioning among the variants. Based on the lattice strain measurements, the load partitioning among variants is also estimated.

In-situ Synchrotron X-ray Diffraction Study of Stress-Induced Phase Transformation in Ti50.1Ni40.8Cu9.1 Thin Films

In Situ Synchrotron X-ray Diffraction Analysis of Deformation Behaviour in Ti-Ni-based Thin Films.

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Stress Induced Phase Transformation in Ti60Cu14Ni12Sn4Ta10 Nanostructure Dendrite Composite: in Situ High-Energy X-ray Diffraction Study

Phase-stress Partition and Stress-Induced Martensitic Transformation in NbTi/NiTi Nanocomposite

In-Situ Neutron Diffraction Investigation of Austenite → Ε-Martensite → Α-Martensite Transformation and Its Dynamic Effect on Macroscopic Serration in a 13%mn Metastable Austenitic Steel

In situ TEM studies of the stress-induced martensitic transformation in nanometric NiTi polycrystal strips

Synchrotron-based Multiscale Study on Phase Transformation in a Cold-Rolled NiTi Shape Memory Alloy: Effects of Preexisting Defects

Orientation Dependence of Stress-Induced Martensitic Transformation in Quenched Ti-50.8at%Ni Single Crystals

In situ EBSD investigations of the asymmetric stress-induced martensitic transformation in TiNi shape memory alloys under bending

Transmission electron microscopy studies of microstructures evolution in Ti2448 single crystals under tensile stress

Stress-induced martensitic transformation in a β-solution treated Ti–10V–2Fe–3Al alloy during compressive deformation

In-situ high energy X-ray diffraction study of microscopic deformation behavior of martensite variant reorientation in NiTi wire

In-situ Synchrotron High Energy X-ray Diffraction Study of Phase Transformation of Intermetallic Ti3Sn

Stress-induced martensitic transformation cooperative collective effects in superelastic polycrystalline tini shape memory alloys

High-energy X-ray Diffuse Scattering Studies on Deformation-Induced Spatially Confined Martensitic Transformations in Multifunctional Ti–24Nb–4Zr–8Sn Alloy

Stress-induced Phase Transformation and Phase Boundary Sliding in Ti: an Atomically Resolved In-Situ Analysis

Stress-induced martensitic transformation in nanometric NiTi shape memory alloy strips: An in situ TEM study of the thickness/size effect

In-situ Synchrotron Diffraction Study of the Localized Phase Transformation and Deformation Behavior in NiTi SMA

Insitu Neutron Diffraction Study of Micromechanical Interaction and Phase Transformation in Dual Phase Niti Alloy During Tensile Loading

EBSD studies of the stress-induced B2–B19′ martensitic transformation in NiTi tubes under uniaxial tension and compression