Abstract:When NiTi shape memory alloys thin strips under the uniaxial tensile deformation, the stress-induced martensitic transformation tends to exhibit strain localization and instability, and the sample shows reversible transformation bands evolution on macroscopic. The displacement, strain and temperature fields were investigated with in situ optical method, and the full-field strain and temperature information about martensitic localization were quantitatively obtained during uniaxial loading-unloading conditions. Strain field is calculated by digital image correlation (DIC) method, and the temperature field is captured by infrared thermograph, the thickness field and in-plane rotation angle are also calculated by DIC data. The strain, temperature variation, thickness, in-plane rotation both inside and outside of the transformation bands were studied when it nucleation, expansion, combination, reduction and disappear. The results show that transformation strain of the samples are mainly concentrated inside the transformation bands but small outside, and temperature variation mainly concentrated in the transformation fronts, the thickness field in transformation bands is 2% smaller than out of bands. In-plane rotation angle is not only concentrated in the transformation fronts, but also heterogeneous in the transformation bands. In addition, the maximum in-plane rotation angle during tension is 1.5 degrees. The whole loading-unloading progress is full thermal coupling, transformation localization, martensite and austenitic critical nucleation stress are greatly influenced by temperature variation.

EXPERIMENTAL INVESTIGATION ON THE STRESS-INDUCED MARTENSITIC TRANSFORMATION AND THE MICROSTRUCTURE EVOLUTION IN CuAlNi SINGLE CRYSTAL

Stabilization of deformed stress-induced martensite and its effect on shape memory effect in an Fe-Mn-Si-Ni-Co alloy

Quantitative analysis of microstructure evolution in shape memory alloys during martensitic transformation

Analysis of microstructure evolution during tensile stress induced martensitic transformations

Structural and Phase Transformations and Physical and Mechanical Properties of Cu-Al-Ni Shape Memory Alloys Subjected to Severe Plastic Deformation and Annealing

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Interface Stress Evolution of Martensitic Transformation in Mncu Alloys: A Phase-Field Study

In Situ Observation of Thermoelastic Martensitic Transformation of Cu-Al-Mn Cryogenic Shape Memory Alloy with Compressive Stress

Characteristics of Stress-Induced Transformation and Microstructure Evolution in Cu-based SMA

Stress-induced martensitic transformation cooperative collective effects in superelastic polycrystalline tini shape memory alloys

Martensitic Transformation in Submicron Cu-Al-Ni Pillar

Microstructure, Martensitic Transformation And Superelasticity Of T1(49) (6)N1(45 1)Cu(5)Cr(0 3) Shape Memory Alloy

Stress-induced Crystallographic and Microstructural Evolution for Hierarchically Twinned Martensite in Single- and Dual-Phase Ni-Mn-Ga Alloys

Investigation on the Deformation of TiNi Shape Memory Alloy with a Crack Using Moiré Interferometry

In situ TEM studies of the stress-induced martensitic transformation in nanometric NiTi polycrystal strips

SIMULATION AND ANALYSIS OF THE MICROSTRUCTURE EVOLUTION DURING MARTENSITIC PHASE TRANSITION

Microstructure, Martensitic Transformation and Superelasticity of Ti49.6Ni45.1Cu5Cr0.3 Shape Memory Alloy

In Situ Multi-Fields Investigation on Instability and Transformation Localization of Martensitic Phase Transformation in Niti Alloys

Microstructure of Stress-Induced Martensite in a Ti–Ni–Hf High Temperature Shape Memory Alloy

Orientation Dependence of Stress-Induced Martensitic Transformation in Quenched Ti-50.8at%Ni Single Crystals

Stress-induced martensitic transformation in nanometric NiTi shape memory alloy strips: An in situ TEM study of the thickness/size effect