Abstract:Mechanical training via cyclic loading and unloading was widely used in NiMnGa shape memory alloys (SMAs) to create single or double variant states for reducing the resistance to variant reorientation and thus achieving a maximum shape memory strain. In this work, an effort was made to reveal the deformation mechanism of a polycrystalline Ni52Mn27Ga17Co4 high-temperature SMAs consisting of non-modulated (NM) martensite with uniform orientation and surrounding γ precipitates. The NM martensite microstructure was characterized as a self-accommodated hierarchical twinned-structure prior to deformation. Based on the interrupted in-situ EBSD measurements and phase-field simulations, it was demonstrated that the compressive loading resulted in the thickening of the stress-favored variants with the <001>NM direction perpendicular to compression axis at different dimensional scales. The path consisted of two subsequent processes–first detwinning of the nano-lamellae within one micro-variant through inter-lamellae boundary motion, and then reorientation of micro-variants through inter-plate boundary motion. The Schmid factor and preferred orientation of nano-lamellae (or strain accommodation) dominated the entire detwinning/reorientation process of NM martensite. As a result, the hierarchically twinned microstructure almost evolved into a single-variant state with the disappearance of packet boundaries. The ductile γ phase with network structure possessed more excellent strain-accommodated ability to the macroscopic deformation, hence significantly enhancing the mechanical properties including the ultimate compressive strength and elongation of NiMnGa SMAs.

Investigation on the Deformation of TiNi Shape Memory Alloy with a Crack Using Moiré Interferometry

Effect of Thermomechanical Coupling on Stress-Induced Martensitic Transformation Around the Crack Tip of Edge Cracked Shape Memory Alloy

On the Formation of Martensite in Front of Cracks in Pseudoelastic Shape Memory Alloys

Phase Transformation Behavior of Pseudoelastic Niti Shape Memory Alloys under Large Strain

Experimental and FEM Analysis of the Fracture Behavior in NiTi Shape Memory Alloys

Transformation Yield Surface of Nanocrystalline NiTi Shape Memory Alloy

Investigation on Stress Field near Crack-Tip of Mode I in Shape Memory Alloy

Investigation Of The Propagation Of Stress Wave In Nickel-Titanium Shape Memory Alloys

Time-Dependent Deformation Behavior of TiNi Shape-Memory Alloy

In-situ Synchrotron Diffraction Study of the Localized Phase Transformation and Deformation Behavior in NiTi SMA

Molecular Dynamics Simulation of Mechanical Behavior and Phase Transformation of Nanocrystalline NiTi Shape Memory Alloy with Gradient Structure

Mechanically-induced Martensite Transformation of NiTiFe Shape Memory Alloy Subjected to Plane Strain Compression

Deformation induced self-accommodation morphology transition from triangular to nano-twinned martensite in Ti-Nb-Zr shape memory alloys

Study on Martensite Phase Transformation near Crack Tip of Mode II in Shape Memory Alloy

In Situ Study of Evolution of Stress-Induced Martensitic Transformation in TiNi Shape Memory Alloy During Cyclic Deformation

Measurement of Phase Transformation Properties under Moderate Impact Tensile Loading in a NiTi Alloy

Effect of Plane Strain Compression and Subsequent Recrystallization Annealing on Microstructures and Phase Transformation of NiTiFe Shape Memory Alloy

Crystallographic Mechanisms of Fracture in A Textured Polycrystalline Tini Shape Memory Alloy

Investigation on the fracture behavior of shape memory alloy NiTi

Experimental Investigation on the Mechanical Instability of Superelastic NiTi Shape Memory Alloy

Stress-induced detwinning/reorientation of hierarchically twinned martensite and deformation micro-mechanism in Ni52Mn27Ga17Co4 shape memory alloys: Experimental and phase-field studies