Abstract:A constitutive model of the macroscopic behaviors of nanoporous Shape Memory Alloys (SMAs) is developed, and the effects of tensile-compressive asymmetry, grain size, and porosity are all considered because the influences of these factors cannot be ignored. A finite-volume, three-phase micromechanical model that contains the grain boundary phase, grain-core phase, and uniformly distributed pores is first given to represent the grains of nanoporous NiTi SMAs. The secant equivalent bulk modulus and shear modulus of the nanoporous NiTi SMAs were calculated by using the extended Mori-Tanaka method. Due to the high plastic yield limit of the grain boundary phase, the grain boundary phase is regarded as the region where no phase change occurs. And the overall phase transformation can be caused by the grain-core phase. The phase transformation is established according to the J 2 , J 3 theory and the von Mises equivalence effect. The martensite volume fraction is represented in this article as a linear interpolation function of equal effectiveness. Based on the strain-hardening behavior, the equivalent stress of nanoporous NiTi SMAs is represented by a power function consisting of transformation onset stress, hardening modulus, equivalent phase change strain, and hardening index. Then, the constitutive model describing the superelastic behavior can be obtained. By comparing the numerical simulation results with the experimental results, it is verified that the constitutive model proposed in this paper can better describe the superelastic behavior of the nanoporous NiTi SMAs. Finally, through numerical simulations, it was found that tensile-compressive asymmetry, grain size, and porosity have significant effects on the superelastic behavior of nanoporous NiTi SMAs. This study will provide a theoretical basis for the application of nanoporous NiTi SMAs.

Tension-Compression Asymmetry of Single-Crystalline and Nanocrystalline NiTi Shape Memory Alloy: an Atomic Scale Study

Molecular Dynamics Simulations on Nanocrystalline Super-Elastic NiTi Shape Memory Alloy by Addressing Transformation Ratchetting and Its Atomic Mechanism

Molecular Dynamics Simulations to the Pseudo-Elasticity of NiTi Shape Memory Alloy Nano-Pillar Subjected to Cyclic Compression

Observation of Phase Transformation and Structural Analysis for Ni-Ti Alloy by Molecular Dynamics Simulation

Stress-induced detwinning/reorientation of hierarchically twinned martensite and deformation micro-mechanism in Ni52Mn27Ga17Co4 shape memory alloys: Experimental and phase-field studies

Intrinsic response of nanocrystalline superelastic NiTi shape memory alloy

A constitutive model of nanoporous NiTi shape memory alloys considering tensile-compressive asymmetry, grain size and porosity

NiTi shape memory alloys under nanoindentation with different atomic compositions

Investigation on the Deformation of TiNi Shape Memory Alloy with a Crack Using Moiré Interferometry

Deformation induced self-accommodation morphology transition from triangular to nano-twinned martensite in Ti-Nb-Zr shape memory alloys

Mechanisms of stress-induced martensitic transformation and transformation-induced plasticity in NiTi shape memory alloy related to superelastic stability

Atomistic study on the super-elasticity of nanocrystalline NiTi shape memory alloy subjected to a cyclic deformation

A physical model of polycrystalline Ni-Ti shape memory materials

Experimental Investigation on the Mechanical Instability of Superelastic NiTi Shape Memory Alloy

Comparative study on mechanical and shape memory properties of hot forged NiTiNb in axial and radial direction

Strain states and unique properties in cold-rolled TiNi shape memory alloys

Grain size dependence of stress-assisted two-way memory effect in Ti-50.04 at.% Ni shape memory alloy

In-Situ High-Energy Synchrotron X-Ray Diffraction Study of Micromechanical Behavior of Multiple Phases in Ni47ti44nb9 Shape Memory Alloy

Nanoindentation behaviour simulation of a polycrystalline NiTi shape memory alloy using the crystal plastic finite element method

Crack Growth Behavior in NiTi Shape Memory Alloys Under Mode-I Isothermal Loading: Effect of Stress State

Orientation-dependent shock compression behavior of non-porous/porous NiTi shape memory alloy: An atomic scale study