Crack Growth Behavior in NiTi Shape Memory Alloys Under Mode-I Isothermal Loading: Effect of Stress State

Behrouz Haghgouyan,Ibrahim Karaman,Sameer Jape,Alexandros Solomou,Dimitris C. Lagoudas
DOI: https://doi.org/10.1115/SMASIS2018-8190
2018-12-06
Abstract:Fracture behavior in nickel-titanium (NiTi) shape memory alloys (SMAs) subjected to mode-I, isothermal loading is studied using finite element analysis (FEA). Compact tension (CT) SMA specimen is modeled in Abaqus finite element suite and crack growth under displacement boundary condition is investigated for plane strain and plane stress conditions. Parameters for the SMA material constitutive law implemented in the finite element setup are acquired from characterization tests conducted on near-equiatomic NiTi SMA. Virtual crack closure technique (VCCT) is implemented where crack is assumed to extend when the energy release rate at the crack-tip becomes equal to the experimentally obtained material-specific critical value. Load-displacement curves and mechanical fields near the crack-tip in plane strain and plane stress cases are examined. Moreover, a discussion with respect to the crack resistance R-curves calculated using the load-displacement response for plane strain and plane stress conditions is presented.
Materials Science
What problem does this paper attempt to address?
This paper attempts to solve the problem of crack growth behavior of nickel - titanium shape memory alloy (NiTi SMA) under Mode - I isothermal loading conditions. Specifically, the research aims to understand the fracture behavior of these materials under isothermal conditions through finite element analysis (FEA) and explore the influence of stress states on crack growth. ### Main problems 1. **Crack growth behavior**: Study the crack growth behavior of NiTi shape memory alloy under Mode - I isothermal loading conditions. 2. **Influence of stress states**: Explore the influence of different stress states (plane strain and plane stress) on crack growth. 3. **Energy release rate and crack growth resistance**: Analyze the energy release rate (GI) at the crack tip and the crack growth resistance curve (R - curve) to evaluate the fracture toughness of the material. ### Research methods - **Finite element modeling**: Use Abaqus software to model compact tension (CT) specimens and apply displacement boundary conditions to simulate Mode - I experiments. - **Virtual crack closure technique (VCCT)**: Used to calculate the energy release rate (GI) at the crack tip and determine the critical value (GIc) of crack growth. - **Material parameter calibration**: Calibrate the elastic constants and other parameters in the model based on the material properties of near - equiatomic NiTi SMA. ### Key findings - **Stress - induced phase transformation zone**: Under plane stress conditions, the stress - induced martensitic phase transformation zone near the crack tip is larger and more obvious, which leads to significant differences from the plane strain conditions. - **Load - displacement response**: The load - displacement curve under plane stress conditions shows an earlier non - linear deviation and a more obvious load drop, indicating more significant crack growth. - **Crack growth resistance curve (R - curve)**: A rising R - curve is observed in both stress states, indicating that the fracture toughness is enhanced due to the closing stress caused by the phase transformation. However, the slope of the R - curve under plane stress conditions is gentler, while the slope under plane strain conditions is steeper, which reflects the different energy dissipation mechanisms in the two cases. ### Conclusions - This study shows that under plane strain conditions, more energy is used for phase transformation dissipation, while under plane stress conditions, crack growth is the main energy dissipation mechanism. - These findings are helpful for better understanding and designing SMA components with larger geometric dimensions, thereby improving their reliability and durability in intelligent structures. Through the above research, the author provides important theoretical basis and technical support for understanding and predicting the fracture behavior of NiTi shape memory alloy in practical applications.