Abstract:In this work, molecular dynamics simulation and linear elastic fracture mechanics were employed to analyze the crack-tip behavior of a Mode I crack in nanocrystalline titanium. The effects of crystalline orientation, twin boundary and stacking fault on crack propagation were taken into account. Simulation results demonstrate that the crack-tip behavior and thus the crack propagation mode strongly depend on crystalline orientations and plane defects. Cracks lying on the hexagonal close-packed basal plane, the prismatic plane, or along a stacking fault plane defect propagate in a brittle manner, without involving proper dislocation emissions and twin nucleations in the crack-tip vicinity. In contrast, cracks show a ductile propagation behavior when aligned along the pyramidal plane, the {10 (1) over tilde2} plane, or the {10 (1) over bar2} <(1) over bar 011 > twin boundary. For these cases, local crack-tip plasticity and crack-tip reconstructions are found to play significant roles. The impact of strain rate on the crack-tip behavior of a basal crack was also investigated in detail. Five strain rates varied between 10(9) s(-1) and 10(10) s(-1) were considered. With increased strain rates, a brittle-to-ductile transition was clearly observed for crack propagation. The desired transition can be attributed to the high stress and energy concentrations near the crack-tip under elevated strain rates, leading to the successive emission and propagation of partial dislocations. To verify and validate the simulation results, a theoretical analysis on the competition between brittle and ductile crack propagations was also implemented. The theoretical predictions based on the linear elastic fracture mechanics were found to reasonably agree with the simulation results. The observations and conclusions deduced from the combined modeling and theoretical study are helpful to the better understanding of fracture mechanics in nanocrystalline titanium.

Crystallographic Mechanisms of Fracture in A Textured Polycrystalline Tini Shape Memory Alloy

Fracture Behavior of the Compact Tension Specimens in NiTi Shape Memory Alloys

The Effect of Grain Orientation on the Tensile‐compressive Asymmetry of Polycrystalline NiTi Shape Memory Alloy

Cracking in a Fe–25Mn–3Si–3Al Steel

Crystallographic Micro-Mechanism of Faceted Crack Initiation in Near-Α Titanium Alloy Ti6321 under Room-Temperature Fatigue and Dwell Fatigue Loadings

On the Formation of Martensite in Front of Cracks in Pseudoelastic Shape Memory Alloys

Experimental and FEM Analysis of the Fracture Behavior in NiTi Shape Memory Alloys

In-situ Observation of Crack Initiation and Propagation in Ni-based Superalloy with Film Cooling Holes During Tensile Test

Plastic Deformation Mechanism Transition of Ti/Ni Nanolaminate with Pre-Existing Crack: Molecular Dynamics Study*

Crack propagation paths and fracture of Ni-based single crystal

Effects of Crystalline Orientation, Twin Boundary and Stacking Fault on the Crack-Tip Behavior of a Mode I Crack in Nanocrystalline Titanium

Atomistic Study on Crystal Orientation-Dependent Crack Propagation and Resultant Microstructure Anisotropy in NiTi Alloys

The Nano- And Mesoscopic Cooperative Collective Mechanisms Of Inhomogenous Elastic-Plastic Transitions In Polycrystalline Tini Shape Memory Alloys

Effect of Thermomechanical Coupling on Stress-Induced Martensitic Transformation Around the Crack Tip of Edge Cracked Shape Memory Alloy

In Situ Study of Martensitic Transformation and Nucleation and Propagation of Cracks in Cu-Ni-Al Shape Memory Alloy

Cohesive Zone Modeling for Crack Propagation in Polycrystalline NiTi Alloys Using Molecular Dynamics

Investigation on the Deformation of TiNi Shape Memory Alloy with a Crack Using Moiré Interferometry

Anisotropy in Fracture Toughness and Toughening Mechanism of Ti-22Al-25Nb Alloy Related to Texture and Grain Boundary Damage

Investigation on the fracture behavior of shape memory alloy NiTi

Micromechanisms of Deformation and Fracture in a Ti3Al-Nb Alloy

In-situ Study of Martensitic Transformation and Nucleation, Propagation of Crack in CuNiAl Shape Memory Alloy