Abstract:Ti-13 V-3Al (at%) high temperature shape memory alloy was considered attractive material due to its low density. The demand for the better shape memory performance is proposed to widen the scope of application. In the present study, Ti-13 V-3Al is processed by high-pressure torsion and annealing. The microstructure, martensitic transformation and mechanical properties were investigated. The severe plastic deformation introduced high density defects and decreased the stability of the alpha" phase. The phase constitution is the sole beta phase after high-pressure torsion, which was related to the Gibbs-Thomson effect. After the annealing treatment at 700 degrees C, numerous small parallel alpha" martensite variants were observed, which was affected by the residual defects. More nucleation sites were provided, resulting that the reverse martensitic transformation was accomplished in a narrow temperature range. Moreover, the formation of (111) type I twinning become easier due to the assistance of the (111) stacking faults. The alpha" martensite variants became larger and evolved to the V-shaped and the triangular self-accommodated morphologies as the annealing temperature increased to 800 degrees C. The twinning relationship in the different annealing temperature both were the (111) type I twinning. The properties were characterized by the tensile loadingunloading tests and microhardness tests. The shape memory effect was optimized and 4% full recoverable strain was obtained in the alloy annealed at 700 degrees C. The apparent hardness decreased from 323HV and 263HV as the annealing temperature raised from 700 degrees C to 800 degrees C. (C) 2021 Elsevier B.V. All rights reserved.

Microstructure, Martensitic Transformation And Superelasticity Of T1(49) (6)N1(45 1)Cu(5)Cr(0 3) Shape Memory Alloy

Microstructure, Martensitic Transformation and Superelasticity of Ti49.6Ni45.1Cu5Cr0.3 Shape Memory Alloy

Microstructure , martensitic transformation and superelasticity of Ti 49 . 6 Ni 45 . 1 Cu 5 Cr 0 . 3 shape memory alloy

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

Microstructure characterization, stress–strain behavior, superelasticity and shape memory effect of Cu–Al–Mn–Cr shape memory alloys

Effect of Aging on Martensitic Transformation and Superelasticity of TiNiCr Shape Memory Alloy

Microstructure, martensitic transformation and shape memory effect of Ni38Co12Mn41In9 alloy

Martensitic transformation behaviors of s shape memory alloy

Microstructure and martensitic transformation behavior of CuAlNb high temperature shape memory alloy

Deformation Behaviors at Various Temperatures and Corresponding Microscturcures of Ti36Ni49Hf15alloy

Transformation Behaviors and Superelasticity of Ti 50 Ni 48 Fe 2 Shape Memory Alloy Subjected to Cold-Rolling and Subsequent Annealing

Microstructure, Martensitic Transformation and Shape Memory Effect of Polycrystalline Cu-Al-Mn-Fe Alloys

Microstructure and Transformation Behavior of Ni 50 Ti 45 Ta 5 Shape Memory Alloy

Martensitic Transformation and Shape Memory Effect of Ti–49at.%Ni Alloys

Structural and Phase Transformations and Physical and Mechanical Properties of Cu-Al-Ni Shape Memory Alloys Subjected to Severe Plastic Deformation and Annealing

Microstructure, superelasticity and shape memory effect by stress-induced martensite stabilization in Cu–Al–Mn–Ti shape memory alloys

Microstructure, Martensitic Transformation, Mechanical and Shape Memory Properties of Ni–Co–Mn–In High-Temperature Shape Memory Alloys under Different Heat Treatments

The Microstructure and Martensitic Transformation of Ti-13V-3Al Light Weight Shape Memory Alloy Deformed by High-Pressure Torsion

Effect of Material State on the Phase Transformation of NiTi Shape Memory Alloy

Microstructure and High-Temperature Shape-Memory Effect in Ni54mn25ga21 Alloy

Influence of Deformation on Microstructure and Transformation Temperature of Shape Memory Alloy Fe-Mn-Si-Cr-Ni