Abstract:Fe–Ni–Co–Al-based systems have attracted a lot of interest due to their large recoverable strain. In this study, the microstructure and thermal cycling behaviors of Fe41Ni28Co17Al11.5Ti1.25Nb1.25 (at.%) 98.5% cold-rolled alloys after annealing treatment at 1277 °C for 1 h, followed by aging for 48 h at 600 °C, were investigated. From the electron backscatter diffraction results, we see that the texture intensity increased from 9.4 to 16.5 mud and the average grain size increased from 300 to 400 μm as the annealing time increased from 0.5 h to 1 h. The hardness results for different aging heat treatment conditions show the maximum value was reached for samples aged at 600 °C for 48 h (peak aging condition). The orientation distribution functions (ODFs) displayed by Goss, brass, and copper were the main textural features in the FeNiCoAlTiNb cold-rolled alloy. After annealing, strong Goss and brass textures were formed. The transmission electron microscopy (TEM) results show that the precipitate size was ~10 nm. The X-ray diffraction (XRD) results show a strong peak in the (111) and (200) planes of the austenite (⁠⁠γ, FCC) structure for the annealed sample. After aging, a new peak in the (111) plane of the precipitate (⁠⁠γ′, L12) structure emerged, and the peak intensity of austenite (⁠⁠γ, FCC) decreased. The magnetization–temperature curves of the aged sample show that both the magnetization and transformation temperature increased with the increasing magnetic fields. The shape memory properties show a fully recoverable strain of up to 2% at 400 MPa stress produced in the three-point bending test. However, the experimental recoverable strain values were lower than the theoretical values, possibly due to the fact that the volume fraction of the low-angle grain boundary (LABs) was small compared to the reported values (60%), and it was insufficient to suppress the beta phases. The beta phases made the grain boundaries brittle and deteriorated the ductility. On the fracture surface of samples after the three-point bending test, the fracture spread along the grain boundary, and the cross-section microstructural results show that the faces of the grain boundary were smooth, indicating that the grain boundary was brittle with an intergranular fracture.

Transformation Behaviors and Superelasticity of Ti 50 Ni 48 Fe 2 Shape Memory Alloy Subjected to Cold-Rolling and Subsequent Annealing

Microstructure, Martensitic Transformation and Superelasticity of Ti49.6Ni45.1Cu5Cr0.3 Shape Memory Alloy

Phase Transformation Behaviors and Mechanical Properties of Ti 50 Ni 49 Fe 1 Alloy with Severe Plastic Deformation

Superelastic Properties of Aged FeNiCoAlTaB Cold-Rolled Shape Memory Alloys

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

Strain states and unique properties in cold-rolled TiNi shape memory alloys

Effect of Aging on Martensitic Transformation and Superelasticity of TiNiCr Shape Memory Alloy

Effect of Annealing on the Microstructure, Texture, and Properties of Cold-Rolled Ti50Ni47Fe3 Shape Memory Alloy Sheets

Microstructure, Martensitic Transformation And Superelasticity Of T1(49) (6)N1(45 1)Cu(5)Cr(0 3) Shape Memory Alloy

Abnormal superelastic cyclic behavior and stress-induced martensitic transformation mechanism of NiTi alloy with R phase

Achieving Large Near-Linear Elasticity, Low Modulus, and High Strength in a Metastable Β-Ti Alloy by Mild Cold Rolling

Equivalent Heat Treatments and Mechanical Properties in Cold-Rolled TiNiFe Shape-Memory Alloys

Combined Effect of Annealing Temperature and Pre-deformation on the Superelastic Behaviors of NiTi Shape Memory Alloys

Mechanisms of stress-induced martensitic transformation and transformation-induced plasticity in NiTi shape memory alloy related to superelastic stability

Superelasticity and Its Stability of an Ultrafine-Grained Ti49.2ni50.8 Shape Memory Alloy Processed by Equal Channel Angular Pressing

Transformation Behaviour with Thermal Cycling in Ti50Ni43Cu7 Shape Memory Alloy

Thermal Cycling Behavior of Aged FeNiCoAlTiNb Cold-Rolled Shape Memory Alloys

High temperature superelasticity realized in equiatomic Ti-Ni conventional shape memory alloy by severe cold rolling

High-Number-Density Coherent Nanoprecipitates Induce Superelasticity in a Fe-Ni-Co-Al-Based Alloy

Deformation Dependence of Transformation Behavior of Ti-Ni-Nb Wide Hysteresis Shape Memory Alloy

Effect of Electroplastic Rolling on the Ductility and Superelasticity of Tini Shape Memory Alloy