Abstract:Microelectromechanical systems (MEMS) technologies are developing rapidly with increasing study of the design, fabrication and commercialization of microscale systems and devices. Accurate knowledge on the mechanical behaviors of thin film materials used for MEMS is important for successful design and development of MEMS. Here a novel electroplating spring-bridge micro-tensile specimen integrates pin-pin align holes, misalignment compensate spring, load sensor beam and freestanding thin film is demonstrated and fabricated. The specimen is fit into a specially designed micro-mechanical apparatus to carry out a series of monotonic tensile testing on sub-micron freestanding thin films. Certain thin films applicable as structure or motion gears in MEMS were tested including sputtered gold, copper and tantalum nitride thin films. Metal specimens were fabricated by sputtering; for tantalum nitride film samples, nitrogen gas was introduced into the chamber during sputtering tantalum films on the silicon wafer. The sample fabrication method involves three steps of lithography and two steps of electroplating copper to hold a dog bone freestanding thin film. Using standard wet etching or lift off techniques, a series of microtensile specimens were patterned in metal thin films, holes, and seed layer for spring and frame structure on the underlying silicon oxide coated silicon substrate. Two steps of electroplating processing to distinct spring and frame portion of the test chip. Finally, chemical etched away the silicon oxide to separated electroplated specimen and silicon substrate.

A Novel Micro Tensile Testing Instrument with Replaceable Testing Specimen by Parylene Passivation Technique

A New Method for the Micro-Tensile Testing of Thin Film

A Micro-Tensile Method for Measuring Mechanical Properties of Mems Materials

Monotonic and fatigue testing of spring-bridged freestanding microbeams application for MEMS

Improvement Of Thin Film Tensile Testing Technology Using Process Integrated Specimen And Considering Its Out-Of-Plane Deformation

Design and fabrication of a micron scale free-standing specimen for uniaxial micro-tensile tests

A Novel Technique for Mechanical Characterization of Thin Elastomeric Membrane

Design and Development of Novel Electroplating Spring Frame Mems Structure Specimens for the Microtensile Testing of Thin Film Materials

Method for measuring mechanical properties of MEMS thin film materials

Integrated Uniaxial Tensile Test System for Measuring Mechanical Properties of MEMS Materials

Novel technique for mechanical characterization of thin polymeric tissue membrane

In Situ and Real-Time Tensile Testing of Thin Films Using Double-Field-of-view Electronic Speckle Pattern Interferometry

An Apparatus for Measuring Mechanical Properties of Microstructures in Tensile Mode

A Novel Approach to Study Patterned Thin Film Local Stress for Microelectronics Application

Design of testing chip for measuring mechanical properties of thin films

APPLICATION OF SUPER-MICRO TESTER IN MEMS BONDING STRENGTH TEST

MEMS based nanomechanical testing method with independent electronic sensing of stress and strain

An Off-chip Actuated Tensile Test Device for Microscale Mechanical Testing

Micro-tensile tests on micromachined metal on polymer specimens: elasticity, plasticity and rupture

A Mems Tensile Testing Device For Mechanical Characterization Of Individual Nanowires

A Measuring System for Mechanical Characterization of Thin Films Based on a Compactin Situmicro-Tensile Tester and SEM Moiré Method