Abstract:Abstract To enable accurate characterization of the mechanical behavior of materials at the micro-scale, e.g., in micro-systems, experiments are required that are representative of the actual (often multi-axial) loading conditions to which these materials are subjected during fabrication and operation. Equally important is the acquisition of mechanical data in the form of multi-axial force measurements, and the measurement of kinematics by in-situ microscopic techniques. To this end, a micro-mechanical testing rig is here realized using commercially available piezoelectric actuators. It is shown that the setup measures forces with a resolution of $\sim 0.3$ ∼ 0.3 [mN] in the x - and y -directions, and $\sim 50$ ∼ 50 [mN] in the z -direction, over a range of 5 [N], yielding a high dynamic (force) range. Furthermore, displacements can be imposed with a resolution of $\sim 1$ ∼ 1 [nm] over a range of 200 [ μ m], in all three directions ( x , y , z ). The setup is compact, vacuum compatible, and specimens are loaded on top of the setup so that the field of view is unobstructed, allowing for in-situ testing with optical and scanning electron microscopy, and optical profilometry. A generic method is developed for extracting quasi-static forces from the piezoelectric actuators. Furthermore, challenges raised from the use of commercial actuators, for which the public technical specifications are generally incomplete, are overcome and the solution strategy is described. Proof-of-concept experiments on flexible, organic, light-emitting diodes demonstrate the potential of the setup to provide rich micro-mechanical data in the form of tri-axial force and displacement measurements. The commercial availability of the piezoelectric actuators, combined with the proposed engineering solutions lead to a generally accessible micro-mechanical test setup to investigate small-scale specimens under realistic, multi-axial loading conditions.

An New Instrument for Measuring Mechanical Compliance of Micro-Systems

On-line Qualification of a Micro Probing System for Precision Length Measurement of Micro-Features on Precision Parts

An Instrument for Measuring Mechanical Properties of MEMS Materials by Nanoindentation and Micro-Beam-Bending

MEMS Device for Quantitative in Situ Mechanical Testing in Electron Microscope

Measurement of Micro-scale Experimental Mechanics Based on Stage of Optical and Scanning Microscopes

An integrated push-to-pull micromechanical device: Design, fabrication, and in-situ experiment

Video Enhanced Depth-Sensing Indentation Technique for Characterizing Mechanical Behaviour of Biomaterials

Probe-Type Microforce Sensor for Mirco/Nano Experimental Mechanics

An Optical Probe Stage and Its Applications in Mechanical Behavior Measurements of Micro-Objects and Thin Films

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

OS5-2-3 an In-Situ Micro-Tension Setup and Its Application

Development Of The Micro-D Is Placement Amplifier For A Novel Tester Measuring Mechanical Properties Of Mems Materials

An Apparatus for Measuring Mechanical Properties of Microstructures in Tensile Mode

Development of Elastic Diaphragm Structure for Ultra-low Stiffness Probe and Mechanical Properties Testing Method

Development of A Passive Compliant Mechanism for Measurement of Micro/Nanoscale Planar 3-Dof Motions

Micro/nano Scale Mechanical Tests Based on the Probe Platform

Optical Full-Field Technique for Measuring Deformation on Micromechanical Components

Note: Nanomechanical characterization of soft materials using a micro-machined nanoforce transducer with an FIB-made pyramidal tip

An In-Situ, Micro-Mechanical Setup with Accurate, Tri-Axial, Piezoelectric Force Sensing and Positioning

Mechanical Characterization Device For In Situ Measurement Of Nanomechanical Properties Of Micro/Nanostructures

Design and Experiment of a Millimeter-Range and High-Frequency Compliant Mechanism with Two Output Ports