Abstract:Abstract To enable accurate characterization of the mechanical behavior of materials at the micro-scale, e.g., in micro-systems, experiments are required that are representative of the actual (often multi-axial) loading conditions to which these materials are subjected during fabrication and operation. Equally important is the acquisition of mechanical data in the form of multi-axial force measurements, and the measurement of kinematics by in-situ microscopic techniques. To this end, a micro-mechanical testing rig is here realized using commercially available piezoelectric actuators. It is shown that the setup measures forces with a resolution of $\sim 0.3$ ∼ 0.3 [mN] in the x - and y -directions, and $\sim 50$ ∼ 50 [mN] in the z -direction, over a range of 5 [N], yielding a high dynamic (force) range. Furthermore, displacements can be imposed with a resolution of $\sim 1$ ∼ 1 [nm] over a range of 200 [ μ m], in all three directions ( x , y , z ). The setup is compact, vacuum compatible, and specimens are loaded on top of the setup so that the field of view is unobstructed, allowing for in-situ testing with optical and scanning electron microscopy, and optical profilometry. A generic method is developed for extracting quasi-static forces from the piezoelectric actuators. Furthermore, challenges raised from the use of commercial actuators, for which the public technical specifications are generally incomplete, are overcome and the solution strategy is described. Proof-of-concept experiments on flexible, organic, light-emitting diodes demonstrate the potential of the setup to provide rich micro-mechanical data in the form of tri-axial force and displacement measurements. The commercial availability of the piezoelectric actuators, combined with the proposed engineering solutions lead to a generally accessible micro-mechanical test setup to investigate small-scale specimens under realistic, multi-axial loading conditions.

OS5-2-3 an In-Situ Micro-Tension Setup and Its Application

A Uniaxial Tension System and Its Applications in Testing of Thin Films and Small Components.

In Situ and Real-Time Tensile Testing of Thin Films Using Double-Field-of-view Electronic Speckle Pattern Interferometry

An Apparatus for Measuring Mechanical Properties of Microstructures in Tensile Mode

An New Instrument for Measuring Mechanical Compliance of Micro-Systems

MEMS Device for Quantitative in Situ Mechanical Testing in Electron Microscope

An In-Situ, Micro-Mechanical Setup with Accurate, Tri-Axial, Piezoelectric Force Sensing and Positioning

Surface Patterning for Multi-Scale Strain Analysis of In-Situ Sem Mechanical Experiments

A New Micro-Tensile System for Measuring the Mechanical Properties of Low-Dimensional Materials - Fibers and Films

A Measuring System for Mechanical Characterization of Thin Films Based on a Compactin Situmicro-Tensile Tester and SEM Moiré Method

An integrated push-to-pull micromechanical device: Design, fabrication, and in-situ experiment

In Situ Nanoindentation Mechanical Property of Films by Atomic Force Microscope

A Simple Constrained Uniaxial Tensile Apparatus for in Situ Investigation of Film Stretching Processing

MEMS based nanomechanical testing method with independent electronic sensing of stress and strain

Mechanical Characterization Device For In Situ Measurement Of Nanomechanical Properties Of Micro/Nanostructures

Full field and microregion deformation measurement of thin films using electronic speckle pattern interferometry and array microindentation marker method

A New Method for the Micro-Tensile Testing of Thin Film

<i>In situ</i> characterization of the mechanical properties of nanoparticles and nanoscale structures

Improvement Of Thin Film Tensile Testing Technology Using Process Integrated Specimen And Considering Its Out-Of-Plane Deformation

Immersed Cantilever Apparatus for Mechanics and Microscopy

An Optical Probe Stage and Its Applications in Mechanical Behavior Measurements of Micro-Objects and Thin Films