Abstract:Mechanical behavior of film material in micron and nano scales has gained much consideration as it has been extensively used in microelectronics and Microelectromechanical Systems (MEMS). Many works have been carried out to investigate the mechanical properties of film material by undergoing uniaxial micro-tension testing where the micro-tension setups used by many authors are mainly the uniaxial tension in a unique direction. But when these setups are used under a microscopic system, the micro regions being detected often go beyond the scanning scope during the test. This brings in difficulty to accurately calculate the deformations of the detected regions. In this paper, a delicate setup which can accomplish uniaxial tension in the opposing directions and micro force detection is designed to investigate the in-situ microstructure evolution of specimens under loading. Two identical piezoelectric actuators moving in the opposing direction are used to exert forces on the specimen synchronously controlled by a computer. Two symmetrical double-cantilevered force sensors respectively connected to the two PZT actuators are devised to detect the tensile loads applied on the specimen. The force sensors are calibrated using Electronic Speckle Pattern Interferometry (ESPI). The relative gripping and adjusting units located between the double-cantilevered force sensors are employed to ensure that the specimen is under uniaxial load. The proposed tensile setup can be used under an optical microscopic or an AFM stage for studying the morphology changes and deformations of material on grain scale. The elaboration of the system is presented in the paper and an experiment of polycrystalline aluminum thin film deformations based on grain scale is performed to demonstrate its performance.

Design and Application of a Miniature Pneumatic Bellows Loading Device for In-Situ Tensile Testing inside the Scanning Electron Microscope

A Miniaturized Device Coupled with Digital Image Correlation for Mechanical Testing

Surface Patterning for Multi-Scale Strain Analysis of In-Situ Sem Mechanical Experiments

OS5-2-3 an In-Situ Micro-Tension Setup and Its Application

An New Instrument for Measuring Mechanical Compliance of Micro-Systems

An integrated push-to-pull micromechanical device: Design, fabrication, and in-situ experiment

Mechanical Characterization Device For In Situ Measurement Of Nanomechanical Properties Of Micro/Nanostructures

In-situ Transmission Kikuchi Diffraction Nano-tensile Testing

Magnetomechanical Measurements for Nondestructive Evaluation of Failure in Steel Structural Element

In Situ and Real-Time Tensile Testing of Thin Films Using Double-Field-of-view Electronic Speckle Pattern Interferometry

MEMS based nanomechanical testing method with independent electronic sensing of stress and strain

A Multiscale Material Testing System for In Situ Optical and Electron Microscopes and Its Application

A Uniaxial Tension System and Its Applications in Testing of Thin Films and Small Components.

A New Micro-Tensile System for Measuring the Mechanical Properties of Low-Dimensional Materials - Fibers and Films

A New Dynamic Device for Low-Dimensional Materials Testing

B11-O-10In Situ Atomic Scale Mechanical Microscopy

A Nanomechanical Testing Framework Yielding Front&Rear-Sided, High-Resolution, Microstructure-Correlated SEM-DIC Strain Fields

Neural Network Supported Microscale In Situ Deformation Tracking: A Comparative Study of Testing Geometries

Transmission electron microscope nanometer line in situ compressing electromechanical property test device

Advances on in Situ TEM Mechanical Testing Techniques: a Retrospective and Perspective View

Synchronous in-situ measurement for deformation and temperature fields with high spatial and temporal resolution under dynamic loading