Abstract:Background: Full-field, quantitative visualization techniques, such as digital image correlation (DIC), have unlocked vast opportunities for experimental mechanics. However, DIC has traditionally been a surface measurement technique, and has not been extended to perform measurements on the interior of specimens for dynamic, full-scale laboratory experiments. This restricts the use of DIC measurements, especially in the context of heterogeneous materials. Objective: The focus of this study is to develop a method for performing internal DIC measurements in dynamic experiments. The aim is to demonstrate its feasibility and accuracy across a range of stresses (up to 650MPa), strain rates ($10^3$-$10^6$ s$^{-1}$), and high-strain rate loading conditions (e.g., ramped and shock wave loading). Methods: Internal DIC is developed based on the concept of applying a speckle pattern at an inner-plane of a transparent specimen. The high-speed imaging configuration is then focused on the internal speckle pattern. During the dynamic experiment, in-plane, two-dimensional deformations are measured via correlation of the internal speckle pattern. Results: The internal DIC experimental technique is successfully demonstrated in both the SHPB and plate impact experiments. In the SHPB setting, the accuracy of the technique is excellent throughout the deformation regime, with measurement noise of approximately 0.2% strain. For plate impact experiments, the technique performs well, with error and measurement noise of 1% strain. Conclusion: The internal DIC technique has been developed and demonstrated to work well for full-scale dynamic high-strain rate and shock laboratory experiments, and the accuracy is quantified. The technique can aid in investigating the physics and mechanics of the dynamic behavior of materials, including local deformation fields around dynamically loaded material heterogeneities.

A Miniaturized Device Coupled with Digital Image Correlation for Mechanical Testing

Design and Application of a Miniature Pneumatic Bellows Loading Device for In-Situ Tensile Testing inside the Scanning Electron Microscope

An Off-chip Actuated Tensile Test Device for Microscale Mechanical Testing

Small specimen techniques for estimation of tensile, fatigue, fracture and crack propagation material model parameters

A novel quasi-static compression test set-up with micron order accuracy for small specimens

Semi-automatic miniature specimen testing method to characterize the plasticity and fracture properties of metals

Novel miniature in situ hole expansion test coupled with microscopic digital image correlation

An Internal Digital Image Correlation Technique for High-Strain Rate Dynamic Experiments

Multifunctional In-Situ Testing Device for Investigating the Service Performance of Materials

An integrated push-to-pull micromechanical device: Design, fabrication, and in-situ experiment

A Miniaturized Biaxial Tensile Apparatus Based on Torsional Loading Design

A New Micro-Tensile System for Measuring the Mechanical Properties of Low-Dimensional Materials - Fibers and Films

Non-conventional Small-Scale Mechanical Testing of Materials

A New Dynamic Device for Low-Dimensional Materials Testing

A Novel Testing System for Mechanics Properties of the Thin-Walled Micro Components in Inertial System

Integrative Measurement Method for Tensile Test Based on DIC Using Modified Second-Order Shape Function

A Tension-Torsional Fatigue Testing Apparatus For Micro-Scale Components

Nano-Scale Testing of Nanowires and Carbon Nanotubes Using a Micro-Electro-Mechanical System

DIC‐measurement during tensile testing and its approach for the FEM‐simulation of "Die‐Less‐Hydroforming"

Parametrisation of Uniform Deformation in Ductile Metals Using Digital Image Correlation Technology

A Novel Integrated Tension-Compression Design for A Mini Split Hopkinson Bar Apparatus