Abstract:There are many applications from computer hardware and sensors to thin films and coatings in which parts are fabricated in small sizes and low thicknesses. Most of these applications could undergo cyclic loading and unloading conditions during their operation. Therefore, cyclic and fatigue evaluations of these components are an essential topic and should be fully understood. In these cases, due to the dimensional limitations, conventional methods of the fatigue experiments encounter challenges and mostly are not accurate or applicable. Nano- and micro-indentation fatigue tests are considered non- or semi-destructive experiments that have opened a new approach to study the cyclic response of these small-sized specimens and thin films. The objective of the present review paper is to evaluate a convenient, reliable, and non-destructive testing approach in the assessment of fatigue (cyclic) response of materials on a small scale. Along with conventional bulk scale fatigue testing methods (i.e. reverse bending, pull-push, multi-axial bending), the depth-sensing indentation testing technique can be employed to study the cyclic behavior of metallic and non-metallic materials especially when a limited volume of the material is available. In this paper, we tried to cover most of the previous studies performed on indentation fatigue of composites, thin films, coatings, and ceramics along with associated discussions and main findings. We covered the physics behind the indentation and the difference between the indentation and conventional fatigue analyses. Followed by that, microstructural evaluations of some of the studies are provided to give readers more insights into this approach. In most applications, the indentation fatigue technique could be a reliable solution due to its accuracy, simplicity, and nondestructive approach in finding out the fatigue and cyclic behavior of materials having a small size or volume. It is worth noting that the loading mode in the indentation fatigue is completely different than the traditional (bulk-scale) fatigue as the tensile segment of the load cycle is not produced in the indentation fatigue (it is a compression-compression loading cycle). Therefore, the controlling mechanisms of failure between small-scale fatigue and bulk-scale fatigue may not be the same.

Non-conventional Small-Scale Mechanical Testing of Materials

Atomistic perspective on in situ nanomechanics

Small specimen techniques for estimation of tensile, fatigue, fracture and crack propagation material model parameters

A New Perspective on Mechanical Testing: in Situ Compression in the TEM

Assessment of microstructures and mechanical behaviour of metallic materials through non-destructive characterisation

Current Trends in Integration of Nondestructive Testing Methods for Engineered Materials Testing

Recent Developments in Testing Techniques for Elastic Mechanical Properties of 1-D Nanomaterials.

An overview of microscale indentation fatigue: Composites, thin films, coatings, and ceramics

A Miniaturized Device Coupled with Digital Image Correlation for Mechanical Testing

Nano-Scale Testing of Nanowires and Carbon Nanotubes Using a Micro-Electro-Mechanical System

A review of selected small specimen test techniques for identifying deformation and failure properties of metallic materials

Neural Network Supported Microscale In Situ Deformation Tracking: A Comparative Study of Testing Geometries

Size effects in micro and nanoscale materials fracture

Nanoindentation and Mechanical Properties of Materials at Submicro- and Nanoscale Levels: Recent Results and Achievements

A NEW PERSPECTIVE ON NANO-MECHNICS: QUANTITATIVE DEFORMATION TEST IN THE TEM

The development of small specimen mechanical test techniques

Micro/nano Scale Mechanical Tests Based on the Probe Platform

Advances on in Situ TEM Mechanical Testing Techniques: a Retrospective and Perspective View

Mechanical testing of two-dimensional materials: a brief review

Small-Scale Mechanical Testing of Cemented Carbides from the Micro- to the Nano-Level: A Review

A Review on In Situ Mechanical Testing of Coatings