Abstract:A novel three-dimensional (3D) hermetic packaging technique suitable for capacitive microelectromechanical systems (MEMS) sensors is studied. The composite substrate with through silicon via (TSV) is used as the encapsulation cap fabricated by a glass-in-silicon (GIS) reflow process. In particular, the low-resistivity silicon pillars embedded in the glass cap are designed to serve as the electrical feedthrough and the fixed capacitance plate at the same time to simplify the fabrication process and improve the reliability. The fabrication process and the properties of the encapsulation cap were studied systematically. The resistance of the silicon vertical feedthrough was measured to be as low as 263.5 mΩ, indicating a good electrical interconnection property. Furthermore, the surface root-mean-square (RMS) roughnesses of glass and silicon were measured to be 1.12 nm and 0.814 nm, respectively, which were small enough for the final wafer bonding process. Anodic bonding between the encapsulation cap and the silicon wafer with sensing structures was conducted in a vacuum to complete the hermetic encapsulation. The proposed packaging scheme was successfully applied to a capacitive gyroscope. The quality factor of the packaged gyroscope achieved above 220,000, which was at least one order of magnitude larger than that of the unpackaged. The validity of the proposed packaging scheme could be verified. Furthermore, the packaging failure was less than 1%, which demonstrated the feasibility and reliability of the technique for high-performance MEMS vacuum packaging.

Design And Realize Of 3d Integration Of A Pressure Sensor System With Through Silicon Via (Tsv) Approach

Design and Fabrication of WLP Compatible Miniaturized Pressure Sensor System with Through Silicon Via (TSV) Interconnects

Heterogeneous Integration of MEMS Sensor Array and CMOS Readout IC with Through Silicon Via Interconnects

Design and optimization of a TSV 3D packaged pressure sensor for high temperature and dynamic measurement

Process Development of A New Tgv Interposer for Wafer Level Package of Inertial Mems Device

Silicon Micromachined TSVs for Backside Interconnection of Ultra-Small Pressure Sensors

Monolithic Integration of Multiple Sensors on a Single Silicon Chip

Surface Activated Bonding Method Applied in MEMS Pressure Sensor with TSV Structures

Design and Fabrication of a Test Chip for 3D Integration Process Evaluation

3-D Integration and Through-Silicon Vias in MEMS and Microsensors

Microsystems Using Three-Dimensional Integration and TSV Technologies: Fundamentals and Applications

TSV Integrated and Pattern Recognition Based Multimode Degenerated Low-Power 3-Dimensional Smart Sensing Chips

Study on Opto-Mechatronic Hybrid Integration Technology Based on 2.5D Advanced Packaging

Research on a 3D Encapsulation Technique for Capacitive MEMS Sensors Based on Through Silicon Via

Automatic Microassembly System for MEMS Pressure Sensor Packaging

Highly Processable Wtsv Modular Manufacturing for Next Generation 3D MEMS/NEMS Integrated System

A 3D Integration Testing Vehicle with TSV Interconnects

Through silicon via copper electrodeposition for 3D integration

Implementation of three-dimensional SOI-MEMS wafer-level packaging using through-wafer interconnections

Wafer-Level Self-Packaging Design and Fabrication of MEMS Capacitive Pressure Sensors

Design and Implementation of Vertically Integrated Deformable Hermetic Chambers for the Sensitivity Enhancement of CMOS-MEMS Capacitive Pressure Sensor