Abstract:Solution processed field-effect transistors based on single crystalline silicon nanowires (Si NWs) with metal Schottky contacts are demonstrated. The semiconducting layer was deposited from a nanowire ink formulation at room temperature. The devices with 230nm thick SiO2 gate insulating layers show excellent output current-voltage characteristics with early saturation voltages under 2 volts, constant saturation current and exceptionally low dependence of saturation voltage with the gate field. Operational principles of these devices are markedly different from traditional ohmic-contact field-effect transistors (FETs), and are explained using the source-gated transistor (SGT) concept in which the semiconductor under the reverse biased Schottky source barrier is depleted leading to low voltage pinch-off and saturation of drain current. Device parameters including activation energy are extracted at different temperatures and gate voltages to estimate the Schottky barrier height for different electrode materials to establish transistor performance - barrier height relationships. Numerical simulations are performed using 2D thin-film approximation of the device structures at various Schottky barrier heights. Without any adjustable parameters and only assuming low p-doping of the transistor channel, the modelled data show exceptionally good correlation with the measured data. From both experimental and simulation results, it is concluded that source-barrier controlled nanowire transistors have excellent potential advantages compared with a standard FET including mitigation of short-channel effects, insensitivity in device operating currents to device channel length variation, higher on/off ratios, higher gain, lower power consumption and higher operational speed for solution processable and printable nanowire electronics.

p-Type Field Effect Transistors Based on Schottky Junction Ag@SnO Nanostructures

Preparation and Electrical Properties of Electrospun Tin-Doped Indium Oxide Nanowires

Hf-Contacted High-Performance Air-Stable N-Type Carbon Nanotube Transistors

ZnO Nanowire and $\hbox{ws}_{2}$ Nanotube Electronics

Field-Effect Transistors Based on Single-Wall Carbon Nanotubes Bundles

Amelioration of interfacial combination and suppression of oxygen vacancies for high performance environmentally friendly electrospun SnYO nanofiber field-effect transistors

High-Performance Zno Nanowire Field-Effect Transistor With Forming Gas Treated Sio2 Gate Dielectrics

Ultra Low-Voltage Electric Double-Layer Sno2 Nanowire Transistors Gated by Microporous Sio2-Based Solid Electrolyte

Device Structure-Dependent Field-Effect and Photoresponse Performances of P-Type Znte:Sb Nanoribbons

Si Nanowire - Array Source Gated Transistors

High On/off Ratio P-Type Field-Effect Transistor Enabled by a Single Heavily Al-doped Α-Si3n4 Nanowire

Influence of Post-Deposition Annealing on the Novel Alloyed SnSxO1-x Semiconductor in P-Type Thin-Film Transistors

Oxide-Confined Formation of Germanium Nanowire Heterostructures for High-Performance Transistors

Piezotronic and Piezo-Phototronic Effects-Enhanced Core–Shell Structure-Based Nanowire Field-Effect Transistors

Enhancement-Mode Nanowire (nanobelt) Field-Effect-Transistors with Schottky-Contact Source and Drain Electrodes

Unipolar P-Type Single-Walled Carbon Nanotube Field-Effect Transistors Using TTF–TCNQ As the Contact Material

High Performance n- and p-Type Field-Effect Transistors Based on Hybridly Surface-Passivated Colloidal PbS Nanosheets

Field Effect Transistors Based on in Situ Fabricated Graphene Scaffold–ZrO2 Nanofilms

Scaling of N-Type Field-Effect Transistors Based on Aligned Carbon Nanotube Arrays

Thin Film Transistors Fabricated by in Situ Growth of SnO2 Nanobeltson Au∕Pt Electrodes

The Research on Suspended Zno Nanowire Field-Effect Transistor