Abstract:HfO2-based resistive random-access memory (RRAM) with a Ti buffer layer has been extensively studied as an emerging nonvolatile memory (eNVM) candidate because of its excellent resistive switching (RS) properties and CMOS process compatibility. However, a detailed understanding of the nature of Ti thickness-dependent RS and systematic thermal degradation research about the effect of post-metallization annealing (PMA) time on oxygen vacancy distribution and RS performance still needs to be included. Herein, the impact of Ti buffer layer thickness on the RS performance of the Al/Ti/HfO2/TiN devices is first addressed. Consequently, we have proposed a simple strategy to regulate the leakage current, forming voltage, memory window, and uniformity by varying the thickness of the Ti layer. Moreover, it is found that the device with 15 nm Ti shows the minimum cycle-to-cycle variability (CCV) and device-to-device variability (DDV), good retention (105 s at 85 °C), and superior endurance (104). In addition, thermal degradation of the Al/Ti(15 nm)/HfO2/TiN devices under different PMA times at 400 °C is carried out. It is found that the leakage current increases and the forming voltage and memory window decrease with the increase in PMA time due to the thermally activated oxidation of the Ti. However, when the PMA time increases to 30 min, the Ti can no longer capture oxygen from HfO2 due to the formation of self-limited TiOx. Therefore, the device shows superior thermal stability with a PMA time of 90 min at 400 °C and no degradation of the memory window, uniformity, endurance, or retention. This work demonstrates that the Ti/HfO2-based RRAM shows superior back-end-of-line compatibility with high thermal stability up to 400 °C for over an hour.

Improvement of Device Reliability by Introducing a BEOL-Compatible TiN Barrier Layer in CBRAM

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

Interface Engineering Via MoS2 Insertion Layer for Improving Resistive Switching of Conductive‐Bridging Random Access Memory

A Systematic Investigation of TiN/CuxO/Cu RRAM with Long Retention and Excellent Thermal Stability

A Probe of Reliability Issues of Oxide Electrolyte Based CBRAM

Ru-Based Oxide Resistive Random Access Memory For Beol-Compatible Novel Nvm Applications

Lower Power, Better Uniformity, and Stability CBRAM Enabled by Graphene Nanohole Interface Engineering

Stable and Repeatable Zro2 Rram Achieved by Nio Barrier Layer for Negative Set Phenomenon Elimination

Performance Improvement Via Stack Engineering and Post-bake Retention State Stabilization in Fully CMOS Compatible HfO2-based RRAM

Self-compliance and High-Performance GeTe-based CBRAM with Cu Electrode

Suppression of Filament Overgrowth in Conductive Bridge Random Access Memory by Ta 2 O 5 /tao X Bi-Layer Structure

Effect of TiW blocking layer and temperature annealing on resistive switching parameters of Hafnium oxide based CBRAM device

Complementary Resistive Switching Behavior for Conductive Bridge Random Access Memory

Performance Improvement of Conductive Bridging Random Access Memory by Electrode Alloying

Resistive Switching Characteristic of Cu Electrode-Based RRAM Device

Methodology for Stability Evaluation on the Multi-Level Storages of Oxide-Based Conductive Bridge Ram (Cbram)

Cluster-Type Filaments Induced by Doping in Low-Operation-Current Conductive Bridge Random Access Memory

Improvement of resistive switching characteristics in ZrO2 film by embedding a thin TiOx layer.

Improvement of Resist Ive Switching in Δ-Cspbi 3 Devices by Inserting Carbon Nanotube

Enhancement of HfO2 Based RRAM Performance Through Hexagonal Boron Nitride Interface Layer

Scaling the CBRAM Switching Layer Diameter to 30 nm Improves Cycling Endurance