Abstract:The common nonpolar switching behavior of binary oxide-based resistive random access memory devices (RRAMs) has several drawbacks in future application, such as the requirements for a high forming voltage, a large reset current, and an additional access device to settle the sneak-path issue. Herein, we propose the tuning of the switching behavior of binary oxide-based RRAMs by inserting an ultra-thin chemically active metal nanolayer, and a case study on Ta2O5-Ta systems is provided. The devices are designed to be Pt/Ta2O5(5 - x/2)/Ta(x)/Ta2O5(5 - x/2)/Pt with x = 0, 2, or 4 nm. The reference devices without the Ta nanolayer exhibit an expected nonpolar switching behavior with a high forming voltage of similar to-4.5 V and a large reset current of >10 mA. In contrast, a self-compliance bipolar switching behavior with a low forming voltage of similar to-2 V and a small reset current of <1 mA is observed after inserting a 2 nm Ta nanolayer. When the Ta nanolayer is increased to 4 nm, a complementary resistive switching (CRS) behavior is found, which can effectively settle the sneak-path issue. The appearance of CRS behavior suggests that a thin Ta nanolayer of 4 nm is robust enough to act as an inner electrode. Besides, the behind switching mechanisms are thoroughly discussed with the help of a transmission electron microscope and temperature-dependent electrical measurements. All these results demonstrate the feasibility of tuning switching behavior of binary oxide-based RRAMs by inserting an ultra-thin chemically active metal nanolayer and might help to advance the commercialization of binary oxide-based RRAMs.

Uniformity and Retention Improvement of TaOx-Based Conductive Bridge Random Access Memory by CuSiN Interfacial Layer Engineering

Different Interface Role in Cuox Based Rram

Improvement of Device Reliability by Introducing a BEOL-Compatible TiN Barrier Layer in CBRAM

Tuning The Switching Behavior Of Binary Oxide-Based Resistive Memory Devices By Inserting An Ultra-Thin Chemically Active Metal Nanolayer: A Case Study On The Ta2o5-Ta System

Superior Retention of Low-Resistance State in Conductive Bridge Random Access Memory with Single Filament Formation

A Systematic Investigation of TiN/CuxO/Cu RRAM with Long Retention and Excellent Thermal Stability

Improved Uniformity and Excellent Endurance Characteristics of TaOx-Based RRAM by Laser-Mediated Interface Engineering

Improvement of resistive switching characteristics in ZrO2 film by embedding a thin TiOx layer.

Performance Improvement of Conductive Bridging Random Access Memory by Electrode Alloying

Improved Uniformity of TaOx-Based Resistive Random Access Memory with Ultralow Operating Voltage by Electrodes Engineering

Forming-free and Self-Rectifying Resistive Switching of the Simple Pt/TaOx/n-Si Structure for Access Device-Free High-Density Memory Application.

Enhancement Of Resistive Switching Ratio Induced By Competing Interfacial Oxygen Diffusion In Tantalum Oxide Based Memories With Metal Nitride Electrode

Uniform,fast,and Reliable CMOS Compatible Resistive Switching Memory

Retention-failure Mechanism of TaN∕CuxO∕Cu Resistive Memory with Good Data Retention Capability

Improvement mechanism of resistance random access memory with supercritical CO 2 fluid treatment

Conduction mechanism of a TaO(x)-based selector and its application in crossbar memory arrays

Improvement of Reliability Characteristics of Tio2-Based Resistive Switching Memory Device with an Inserted Zno Layer

Self-Selection Effects and Modulation of Taox Resistive Switching Random Access Memory with Bottom Electrode of Highly Doped Si

The co-improvement of selectivity and uniformity on NbOx-based selector by Al-doping

Uniform, Fast, and Reliable LixSiOy-Based Resistive Switching Memory

Optimization of TiN/TaOx/HfO2/TiN RRAM Arrays for Improved Switching and Data Retention