Abstract:The common nonpolar switching behavior of binary oxide-based resistive random access memory devices (RRAMs) has several drawbacks in future application, such as the requirements for a high forming voltage, a large reset current, and an additional access device to settle the sneak-path issue. Herein, we propose the tuning of the switching behavior of binary oxide-based RRAMs by inserting an ultra-thin chemically active metal nanolayer, and a case study on Ta2O5-Ta systems is provided. The devices are designed to be Pt/Ta2O5(5 - x/2)/Ta(x)/Ta2O5(5 - x/2)/Pt with x = 0, 2, or 4 nm. The reference devices without the Ta nanolayer exhibit an expected nonpolar switching behavior with a high forming voltage of similar to-4.5 V and a large reset current of >10 mA. In contrast, a self-compliance bipolar switching behavior with a low forming voltage of similar to-2 V and a small reset current of <1 mA is observed after inserting a 2 nm Ta nanolayer. When the Ta nanolayer is increased to 4 nm, a complementary resistive switching (CRS) behavior is found, which can effectively settle the sneak-path issue. The appearance of CRS behavior suggests that a thin Ta nanolayer of 4 nm is robust enough to act as an inner electrode. Besides, the behind switching mechanisms are thoroughly discussed with the help of a transmission electron microscope and temperature-dependent electrical measurements. All these results demonstrate the feasibility of tuning switching behavior of binary oxide-based RRAMs by inserting an ultra-thin chemically active metal nanolayer and might help to advance the commercialization of binary oxide-based RRAMs.

Enhancement Of Resistive Switching Ratio Induced By Competing Interfacial Oxygen Diffusion In Tantalum Oxide Based Memories With Metal Nitride Electrode

Resistive switching in Nb-doped SrZrO3 memory films: An effective approach with a Cu modulation layer

Reversible Transition of Volatile to Non-Volatile Resistive Switching in Cu/SiNx/ZnO/Pt Memristor

Migration of Interfacial Oxygen Ions Modulated Resistive Switching in Oxide-Based Memory Devices

Improvement of resistive switching characteristics in ZrO2 film by embedding a thin TiOx layer.

Tuning The Switching Behavior Of Binary Oxide-Based Resistive Memory Devices By Inserting An Ultra-Thin Chemically Active Metal Nanolayer: A Case Study On The Ta2o5-Ta System

Improvement of Reliability Characteristics of Tio2-Based Resistive Switching Memory Device with an Inserted Zno Layer

Influence of Metal Electrode on the Performance of ZnO Based Resistance Switching Memories

Programmable Complementary Resistive Switching Behaviours of a Plasma-Oxidised Titanium Oxide Nanolayer

Improved Performance of NbOx Resistive Switching Memory by In-Situ N Doping

Engineering resistive switching behavior in TAO<inf>x</inf> based memristive devices for non-von Neuman computing applications

Improvement Of Resistive Switching Properties In Zro2-Based Reram With Implanted Ti Ions

Modulating Metallic Conductive Filaments Via Bilayer Oxides in Resistive Switching Memory

Resistive Switching Behaviour of A Tantalum Oxide Nanolayer Fabricated by Plasma Oxidation

Endurance Enhancement Of Cu-Oxide Based Resistive Switching Memory With Al Top Electrode

Improvement of endurance degradation for oxide based resistive switching memory devices correlated with oxygen vacancy accumulation effect

Highly Uniform Resistive Switching Characteristics of Tin/Zro2/Pt Memory Devices

Ionic Doping Effect In Zro2 Resistive Switching Memory

Improvement of Resistive Switching Properties in <formula formulatype="inline"><tex Notation="TeX">$ \hbox{ZrO}_{2}$</tex></formula>-Based <emphasis emphasistype="roman">ReRAM</emphasis> With Implanted Ti Ions

Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering

Annealed AlOx Film with Enhanced Performance for Bipolar Resistive Switching Memory