Abstract:The stress-based criteria have long been adopted as the major guideline in the design of line pipes, but for those under the displacement control, such as pipelines in seismic regions, landslide areas and subsea environment, the stress-based criteria tend to be relatively conservative, instead the strain-based criteria will be more economic and reasonable to use in the pipe design. Hence, the strain-based design methods in different international standards were summarized and compared, as well as their applicable conditions. In view of the different formulas of the ultimate compressive strain of local buckling in the standards of Norway, Canada, etc., calculations of the ultimate compressive strain were conducted under different radius-thickness ratios and design pressures. It is revealed that the Canadian standard expression and Japanese SUZUKI formula are more conservative. To meet the demand of real engineering application, it was suggested that 0.3 t/D (t refers to the pipe wall thickness; D refers to the external diameter of pipes) be adopted as a conservative estimation of the ultimate compressive strain in the absence of design pressure, and that the Canada standard expression be employed while the design pressure can not be ignored. Because the strain-based design process has not been proposed in the Chinese pipeline codes, the work of this paper can serve as a reference for the research in the relevant areas in present China.

PLASTIC LIMIT LOAD OF PRESSURIZED PIPING BRANCH JUNCTIONS UNDER COMBINED LOADINGS

Study of plastic limit load of the combined fittings of double elbows under in-plane bending moment

Finite Element Analysis on the Mechanical Properties of the Combined Fittings With a Long Radius and Double Elbows

An Analysis on the Safety Performance of the Combined Fittings of Straight Tees and Long Radius Elbows

Safety analysis of pressure piping containing incomplete penetration under combined loads

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Unified Plastic Limit Solution for Thick-Walled Cylinder with Size Effect

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Plastic Collapse Analysis of Thin-Walled Pipes Based on Unified Yield Criterion

PLASTIC LIMIT LOAD ANALYSIS OF T-JUNCTIONS OF PIPING WITH LOCAL WALL-THINNINGS UNDER OUT-OF-PLANE MOMENT

A study of the ultimate compressive strain of local buckling in strain-based design of pipelines

Load-carrying capacity of welded hollow spherical joints subject to combined planar tri-directional axial force and bending moment

Plastic Limit Analysis of Defective Piping Systems

Burst Pressure of Pipelines with Plastic Anisotropy under Combined Internal and External Pressures

Limit analysis of equal-diameter piping branch junctions with local wall-thinning under internal pressure

Plastic Limit Load Analysis of Tee Joint Containing Corner Cracks

Limit Analysis for Piping Branch Junctions with Local Wall-Thinning under Pressure

Plastic Limit Analysis of Defective Pipelines under Complex Loads

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Theoretical Assessment of Burst Failure of Internally Pressurized Defect-Free Pipelines with Plastic Anisotropy

A Simplified Computation Method of Plastic Limit Load for Tee Joint Containing Corner Cracks