Abstract:This paper carries out the shakedown and limit analysis of 45-degree piping elbows subjected to steady internal pressure and cyclic in-plane closing, opening and reverse bending moments by means of the recently proposed stress compensation method (SCM). Different geometries of the piping elbows and various combinations of these applied loads are investigated to create various shakedown limit and plastic limit load interaction curves. The plastic limit loads for single internal pressure and single bending moment calculated with the SCM are compared to those calculated with the twice-elastic-slope method. Full step-by-step elastic-plastic incremental finite element analyses are utilized to verify the structural cyclic responses on both sides of the curves obtained and further to confirm the correct shakedown limit loads and boundaries. It is shown that the SCM calculates the shakedown limit load accurately and possess more than 40 times the computational efficiency of the step-by-step elastic-plastic incremental method. The effects of the ratios of bending radius to mean radius and mean radius to wall thickness of the piping elbow as well as loading conditions on shakedown limit and plastic limit load interaction curves are presented. The results presented in this work provide a comprehensive understanding of long term response behaviors of the piping elbow under the combined cyclic loading and offer some essential points to be concerned for the design and integrity assessment of piping systems.

Study of plastic limit load of the combined fittings of double elbows under in-plane bending moment

Finite Element Analysis on the Mechanical Properties of the Combined Fittings With a Long Radius and Double Elbows

An Analysis on the Safety Performance of the Combined Fittings of Straight Tees and Long Radius Elbows

Numerical study of defect free elbows subjected to in-plane bending moment

PLASTIC LIMIT LOAD EQUATIONS OF DEFECT FREE ELBOWS SUBJECTED TO IN-PLANE BENDING MOMENT

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Load-carrying capacity of welded hollow spherical joints subject to combined planar tri-directional axial force and bending moment

Plastic Collapse Loads for Piping Elbows under In-plane Open/Close Bending Moment

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Plastic Limit Load of Welding Piping Tees Under the Action of the In-Plane Bending Moment

Safety analysis of pressure piping containing incomplete penetration under combined loads

ELASTIC FLEXURAL-TORSIONAL BUCKLING OF C-PURLIN AND Z-PURLIN

PLASTIC LIMIT LOAD OF PRESSURIZED PIPING BRANCH JUNCTIONS UNDER COMBINED LOADINGS

PLASTIC LIMIT LOAD ANALYSIS OF T-JUNCTIONS OF PIPING WITH LOCAL WALL-THINNINGS UNDER OUT-OF-PLANE MOMENT

Limit and Shakedown Analysis of 45-Degree Piping Elbows under Internal Pressure and In-Plane Bending

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Evaluation of plastic limit load of piping branch junctions subjected to out-of-plane moment loadings

Limit load analysis for the piping branch junctions under in-plane moment

Mismatch effect on safety assessment of pressure pipe with incomplete penetration defect

Limit Load Interaction of Welded Piping Branch Junctions Subjected to Combined Internal Pressure and Bending

Finite Element-Based Limit Load of Piping Branch Junctions under Combined Loadings