Abstract:<p>The connection between two submarine pipelines is usually made by welding. In the process of welding, the incomplete penetration, incomplete fusion, porosity, cracks and other welding defects are hardly preventable. The incomplete penetration defects at the root of pipeline girth welds can greatly reduce the safety of submarine pipelines and increase the risk of pipeline failure. In this paper, the safety assessment of incomplete penetration defects at the root of pipeline girth welds are studied. Firstly, a novel model of incomplete penetration defects at the root of girth weld pipelines is provided. Then, an analytical solution of the novel model is obtained according to stress function method. Next, the residual strength equation of the incomplete penetration defects at the root of pipeline girth welds is derived based on the analytical solution. In the end, the calculated results of the residual strength equation are verified by finite element method (FEM) and experiment. The results indicate that the calculated values are in good agreement with the FEM and experiment. In addition, the results indicate that the safety assessment method of incomplete penetration defects at the root of pipeline girth welds is feasible. It is beneficial for the safety assessment of pipelines with incomplete penetration defects.</p>

Safety analysis of pressure piping containing incomplete penetration under combined loads

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Mismatch effect on safety assessment of pressure pipe with incomplete penetration defect

Safety Test Research of Pressure Pipes Containing Incomplete Welding Defects

Study on safety evaluation method of incomplete penetration welded pipeline under combined loads of internal pressure and bending moment

Strength Differential Effect and Influence of Strength Criterion on Burst Pressure of Thin-Walled Pipelines

Plastic Collapse Analysis of Thin-Walled Pipes Based on Unified Yield Criterion

An Analysis on the Safety Performance of the Combined Fittings of Straight Tees and Long Radius Elbows

Burst Pressure of Pipelines with Plastic Anisotropy under Combined Internal and External Pressures

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

Finite Element Analysis on the Mechanical Properties of the Combined Fittings With a Long Radius and Double Elbows

Study of plastic limit load of the combined fittings of double elbows under in-plane bending moment

Plastic Limit Analysis of Defective Piping Systems

Plastic Limit Load Analysis of Defective Pipelines

Theoretical Assessment of Burst Failure of Internally Pressurized Defect-Free Pipelines with Plastic Anisotropy

Plastic Limit Analysis of Defective Pipelines under Complex Loads

Practical Computation of the Plastic Collapse Limit of Defective Pipelines under Complex Loadings

PLASTIC LIMIT LOAD ANALYSIS OF T-JUNCTIONS OF PIPING WITH LOCAL WALL-THINNINGS UNDER OUT-OF-PLANE MOMENT

Safety assessment of incomplete penetration defects at the root of girth welds in pipelines