Abstract:Pipelines are widely used in the petroleum industry for oil and gas transportation, and the interaction between pipelines and seabed is crucial for assessing pipeline behavior during lateral thermal buckling. This paper presents a numerical investigation on the pipe-soil interaction behaviour using a recently developed sequential limit analysis approach for deep-water pipelines on soft clay. This approach, primarily based on upper-bound limit analysis, is capable of handling the extremely large deformation problems and implementing the strain softening and strain rate effects. During the analysis, the pipe was laterally driven forward with the elevation of its invert fixed, differing from existing work in which the pipe can dive or rebound during the lateral displacement. The evolution of vertical (V) and horizontal (H) soil resistance was examined, and the validity of the present model is demonstrated using comparisons with centrifuge data. V-H yield envelopes were derived during the analysis to investigate the influence of load path on pipe response. The equivalent friction ratio, H/V, was found to increase linearly with lateral displacement. This study aims to provide guidance for the controlled buckling design for deep-water pipelines, and show the potential of SLA in solving large displacement soil-structure problems in undrained clay.

Plastic Limit Analysis of Defective Pipelines under Complex Loads

Plastic Limit Load Analysis of Defective Pipelines

Practical Computation of the Plastic Collapse Limit of Defective Pipelines under Complex Loadings

A Numerical Approach for Lower Bound Limit Analysis

On the Limit Analysis of Defective Pipelines under Complex Loadings

Plastic Limit Analysis of Pipelines with Part-Through Slots

Plastic Collapse Analysis of Thin-Walled Pipes Based on Unified Yield Criterion

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Plastic Limit Analysis of Defective Piping Systems

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Safety analysis of pressure piping containing incomplete penetration under combined loads

Strength Differential Effect and Influence of Strength Criterion on Burst Pressure of Thin-Walled Pipelines

Unified Plastic Limit Solution for Thick-Walled Cylinder with Size Effect

Theoretical Assessment of Burst Failure of Internally Pressurized Defect-Free Pipelines with Plastic Anisotropy

Burst Pressure of Pipelines with Plastic Anisotropy under Combined Internal and External Pressures

FINITE ELEMENT ANALYSIS OF PLASTIC LIMIT LOADS OF LOCALLY THINNED ELBOWS UNDER INTERNAL PRESSURE AND IN-PLANE BENDING MOMENT

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Numerical Limit Load Analysis of Pipelines with Local Wall-Thinning

PLASTIC LIMIT LOAD ANALYSIS OF T-JUNCTIONS OF PIPING WITH LOCAL WALL-THINNINGS UNDER OUT-OF-PLANE MOMENT