Abstract:In recent years, fiber reinforced concrete (FRC), which is produced by adding strengthening intensifier such as steel fiber, synthetic fiber into plain concrete, so as to improve the tensile and bending strengths of concrete effectively, has been applied more and more in the production of the thick wall cylinder. Since Mohr-Coulomb criterion, Tresca or Mises criterions are all only applicable to materials having equal tensile and compressive strength, these criterions are not applicable to FRC. In this paper, based on the discussion of the softening characteristic of FRC and the unified strength theory (YU Mao Hong and HE Li Nan, 1991), which can take the intermediate principle stress and the softening characteristic of material strain into consideration, the uniform strength principle which is applicable to strain softening material was derived. In addition, the stress characteristic of thick wall cylinder made of FRC was analyzed, and its unified solutions of the elastic and plastic limit loads were derived. The solution could be more practical to the calculation of the limit compression loads of materials with different tensile and compression strength and the thick wall cylinder made of different FRC by taking into account of both the materials' strain softening and the intermediate principal stress.

Unified Plastic Limit Solution for Thick-Walled Cylinder with Size Effect

Unified Solution of a Borehole Problem with Size Effect

Plastic Collapse Analysis of Thin-Walled Pipes Based on Unified Yield Criterion

Strain Gradient Plasticity Solutions of Plastic Region Radius for a Borehole Problem

Elastoplastic Solution of Cylindrical Expansion with Fixed Boundary

Strength Differential Effect and Influence of Strength Criterion on Burst Pressure of Thin-Walled Pipelines

Unified Characteristics Line Theory of Spacial Axisymmetric Plastic Problem

THE UNIFIED SOLUTION FOR AN ELASTO-VISCOPLASTIC PROBLEM

The Unified Limit Load Solution of Fiber-reinforced Concrete Cylinders Considering the Strain Softening of Material

Investigation on Plastic Instability of a Thin-Walled Anisotropic Cylindrical Shell Subjected to Internal Impulsive Loading

A Unified Characteristic Theory for Plastic Plane Stress and Strain Problems

BURST FAILURE ANALYSIS OF PLASTIC ANISOTROPIC THICK-WALLED CYLINDRICAL VESSELS SUBJECTED TO COMBINED PRESSURES

Expansion of Spherical Cavity of Strain-Softening Materials with Different Elastic Moduli of Tension and Compression

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

A novel plastic limit load solution for the orthotropic cylindrical shell with nozzle under internal pressure

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Theoretical Assessment of Burst Failure of Internally Pressurized Defect-Free Pipelines with Plastic Anisotropy

FINITE ELEMENT ANALYSIS OF PLASTIC LIMIT LOADS OF LOCALLY THINNED ELBOWS UNDER INTERNAL PRESSURE AND IN-PLANE BENDING MOMENT

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes