Abstract:Accurate prediction of the burst pressure is indispensible for the engineering design and integrity assessment of the oil and gas pipelines. A plenty of analytical and empirical equations have been proposed to predict the burst pressures of the pipelines; however, it is difficult to accurately predict the burst pressures and evaluate the accuracy of these equations. In this paper, a failure window method was presented to predict the burst pressure of the pipes. First, the security of the steel pipelines under the internal pressure can be assessed. And then the accuracy of the previous analytical and empirical equations can also be generally evaluated. Finally, the effect of the wall thinning of the pipes on the failure window was systemically investigated. The results indicate that it is extremely formidable to establish an equation to predict the burst pressure with a high accuracy and a broad application, while it is feasible to create a failure window to determine the range of the dangerous internal pressure. Calculations reveal that some predictions of the burst pressure equations like Faupel, Soderberg, Maximum stress, and Nadai (1) are overestimated to some extent; some like ASME, maximum shear stress, Turner, Klever and Zhu–Leis and Baily–Nadai (2) basically reliable; the rest like API and Nadai (3) slightly conservative. With the wall thinning of the steel pipelines, the failure window is gradually lowered and narrowed.

Theoretical Assessment of Burst Failure of Internally Pressurized Defect-Free Pipelines with Plastic Anisotropy

Burst Pressure of Pipelines with Plastic Anisotropy under Combined Internal and External Pressures

BURST FAILURE ANALYSIS OF PLASTIC ANISOTROPIC THICK-WALLED CYLINDRICAL VESSELS SUBJECTED TO COMBINED PRESSURES

Strength Differential Effect and Influence of Strength Criterion on Burst Pressure of Thin-Walled Pipelines

Plastic Collapse Analysis of Thin-Walled Pipes Based on Unified Yield Criterion

Estimation of burst pressure of pipeline using twin-shear stress yield criterion

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Effect of the Y/T on the Burst Pressure for Corroded Pipelines with High Strength

Analytical prediction of failure pressure for pipeline with long corrosion defect

Failure pressure analysis of corroded moderate-to-high strength pipelines

The Failure Window Method and Its Application in Pipeline Burst

Investigation on Short-Term Burst Pressure of Plastic Pipes Reinforced by Cross Helically Wound Steel Wires

Plastic Limit Load Analysis of Defective Pipelines

Safety analysis of pressure piping containing incomplete penetration under combined loads

Analysis on the ultimate bearing capacity of plastic pipe reinforced by cross-helically winding steel wires under internal pressure

Practical Computation of the Plastic Collapse Limit of Defective Pipelines under Complex Loadings

Stress–Strain Analysis of a Pipeline With Inner and Outer Corrosion Defects

Plastic Limit Analysis of Defective Piping Systems

Plastic Limit Analysis of Defective Pipelines under Complex Loads