Abstract:In order to evaluate the safety and integrity of piping with local wall-thinning at elevated temperature, a numerical method for plastic limit load of modified 9Cr-1Mo steel piping is proposed in the present paper. The limit load of piping at high temperature is defined as the load-carrying capacity after the structure has served for a certain time period. The power law creep behavior with Liu-Murakami damage model is implemented into the commercial software ABAQUS via CREEP for simulation, and the Ramberg-Osgood model is modified to consider the material deterioration effect of modified 9Cr-1Mo steel by introducing the creep damage factor into the elasto-plastic constitutive equation. For covering the wide ranges of defect ratios and service time periods, various 3-D numerical examples for the piping with local wall-thinning defects, and creep time are calculated and analyzed. The limit loads of the defected structures under high temperature are obtained through classic zero curvature criterion with the modified Ramberg-Osgood model, and the typical failure modes of these piping are also discussed. The results show that the plastic limit load of piping containing defect at elevated temperature depends not only on the size of defect, but also on the creep time, which is different from the traditional plastic limit analysis at room temperature without material deterioration.

Plastic Limit Analysis of Defective Piping Systems

Plastic Limit Load Analysis of Defective Pipelines

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Plastic Limit Analysis of Defective Pipelines under Complex Loads

Plastic Collapse Analysis of Thin-Walled Pipes Based on Unified Yield Criterion

Safety analysis of pressure piping containing incomplete penetration under combined loads

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Plastic Limit Analysis of Pipelines with Part-Through Slots

On the Limit Analysis of Defective Pipelines under Complex Loadings

Practical Computation of the Plastic Collapse Limit of Defective Pipelines under Complex Loadings

Unified Plastic Limit Solution for Thick-Walled Cylinder with Size Effect

Theoretical Assessment of Burst Failure of Internally Pressurized Defect-Free Pipelines with Plastic Anisotropy

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Strength Differential Effect and Influence of Strength Criterion on Burst Pressure of Thin-Walled Pipelines

Burst Pressure of Pipelines with Plastic Anisotropy under Combined Internal and External Pressures

PLASTIC LIMIT LOAD ANALYSIS OF T-JUNCTIONS OF PIPING WITH LOCAL WALL-THINNINGS UNDER OUT-OF-PLANE MOMENT

Study of plastic limit load of the combined fittings of double elbows under in-plane bending moment

Limit Analysis for Piping Branch Junctions with Local Wall-Thinning under Pressure

FINITE ELEMENT ANALYSIS OF PLASTIC LIMIT LOADS OF LOCALLY THINNED ELBOWS UNDER INTERNAL PRESSURE AND IN-PLANE BENDING MOMENT

Plastic Limit Analysis of Piping with Local Wall-Thinning under Elevated Temperature

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes