Abstract:The stress-based criteria have long been adopted as the major guideline in the design of line pipes, but for those under the displacement control, such as pipelines in seismic regions, landslide areas and subsea environment, the stress-based criteria tend to be relatively conservative, instead the strain-based criteria will be more economic and reasonable to use in the pipe design. Hence, the strain-based design methods in different international standards were summarized and compared, as well as their applicable conditions. In view of the different formulas of the ultimate compressive strain of local buckling in the standards of Norway, Canada, etc., calculations of the ultimate compressive strain were conducted under different radius-thickness ratios and design pressures. It is revealed that the Canadian standard expression and Japanese SUZUKI formula are more conservative. To meet the demand of real engineering application, it was suggested that 0.3 t/D (t refers to the pipe wall thickness; D refers to the external diameter of pipes) be adopted as a conservative estimation of the ultimate compressive strain in the absence of design pressure, and that the Canada standard expression be employed while the design pressure can not be ignored. Because the strain-based design process has not been proposed in the Chinese pipeline codes, the work of this paper can serve as a reference for the research in the relevant areas in present China.

Limit Analysis for Piping Branch Junctions with Local Wall-Thinning under Pressure

Limit analysis of equal-diameter piping branch junctions with local wall-thinning under internal pressure

Elastic Compensation Method of Limit Analysis Applications

Unified Plastic Limit Solution for Thick-Walled Cylinder with Size Effect

FINITE ELEMENT ANALYSIS OF PLASTIC LIMIT LOADS OF LOCALLY THINNED ELBOWS UNDER INTERNAL PRESSURE AND IN-PLANE BENDING MOMENT

PLASTIC LIMIT LOAD ANALYSIS OF T-JUNCTIONS OF PIPING WITH LOCAL WALL-THINNINGS UNDER OUT-OF-PLANE MOMENT

A study of the ultimate compressive strain of local buckling in strain-based design of pipelines

Strength Differential Effect and Influence of Strength Criterion on Burst Pressure of Thin-Walled Pipelines

Numerical Limit Load Analysis of Pipelines with Local Wall-Thinning

ELASTIC FLEXURAL-TORSIONAL BUCKLING OF C-PURLIN AND Z-PURLIN

Finite element analysis of the limit load of pipe bend with local wall-thinning defect under complex loads

Limit Analysis of Pipe Structures Using the Finite Element Method

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Plastic Collapse Analysis of Thin-Walled Pipes Based on Unified Yield Criterion

Safety analysis of pressure piping containing incomplete penetration under combined loads

Plastic Limit Analysis of Defective Piping Systems

Finite Element Analysis on the Mechanical Properties of the Combined Fittings With a Long Radius and Double Elbows

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

An Analysis on the Safety Performance of the Combined Fittings of Straight Tees and Long Radius Elbows

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings