Abstract:During service, engineering pipelines may suffer from corrosion, which may affect the safety of the component. For an engineering pipeline subjected to local corrosion, the wall becomes thinner locally and the bending load bearing capacity reduces. Therefore, the evaluation of the bending limit moment for a pipeline with such locally corroded damage is important for assuring safety. In this paper, taking the local thinning length of a pipe in the longitudinal direction into consideration the net-section collapse failure (NSC) criterion, proposed by Kanninen et al., is modified. The limit moment estimated from the modified NSC expression for the local wall-thinning pipe under pure bending is compared with those from 3D elastic–plastic finite element computation. The results show that the modified expression could reflect the longitudinal size effect of the local corrosion, and the estimated results agree with those of the finite element method; the limit moment of the pipe is affected not only by the width of the defect but also by the longitudinal length of the defect. When the relative longitudinal length of the defect (L/Rt) exceeds some critical value (around 1.5), the results from the net-section collapse criterion (NSC) are in reasonable agreement with the results from both the finite element method and the modified expression. Therefore, the NSC formula could be employed to assess the limit load-carrying capability for locally corroded pipe with relatively long defects under bending, while for relatively short defects, the modified expression and FEM give reasonable results compared to the conservative NSC.

Finite element analysis of the limit load of pipe bend with local wall-thinning defect under complex loads

A study of the ultimate compressive strain of local buckling in strain-based design of pipelines

FINITE ELEMENT ANALYSIS OF PLASTIC LIMIT LOADS OF LOCALLY THINNED ELBOWS UNDER INTERNAL PRESSURE AND IN-PLANE BENDING MOMENT

Numerical Limit Load Analysis of Pipelines with Local Wall-Thinning

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Limit Analysis for Piping Branch Junctions with Local Wall-Thinning under Pressure

Limit bending moment for pipes with two circumferential flaws under combined internal pressure and bending

Safety analysis of pressure piping containing incomplete penetration under combined loads

Effects of Bending Moment and Torsion on the Internal Pressure Limit Load of Locally Thinned Pipes

Modified expression for estimating the limit bending moment of local corroded pipeline

Bending failure of the corroded pipeline subjected to initial internal pressure and axial compressive force

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

Limit analysis of equal-diameter piping branch junctions with local wall-thinning under internal pressure

Bending Capacity of Corroded Pipeline Subjected to Internal Pressure and Axial Loadings

PLASTIC LIMIT LOAD ANALYSIS OF T-JUNCTIONS OF PIPING WITH LOCAL WALL-THINNINGS UNDER OUT-OF-PLANE MOMENT

Numerical and Experimental Investigation on Limit Load of Elbow with Local Thinning Area

The research on the critical loading path of thick-walled pipes under external pressure and cyclic bending

Inclusion of Torsion with Bending and Pressure Loads for Pipes with Thin-Wall Regions

Finite Element-Based Limit Load of Piping Branch Junctions under Combined Loadings