Abstract:The stress-based criteria have long been adopted as the major guideline in the design of line pipes, but for those under the displacement control, such as pipelines in seismic regions, landslide areas and subsea environment, the stress-based criteria tend to be relatively conservative, instead the strain-based criteria will be more economic and reasonable to use in the pipe design. Hence, the strain-based design methods in different international standards were summarized and compared, as well as their applicable conditions. In view of the different formulas of the ultimate compressive strain of local buckling in the standards of Norway, Canada, etc., calculations of the ultimate compressive strain were conducted under different radius-thickness ratios and design pressures. It is revealed that the Canadian standard expression and Japanese SUZUKI formula are more conservative. To meet the demand of real engineering application, it was suggested that 0.3 t/D (t refers to the pipe wall thickness; D refers to the external diameter of pipes) be adopted as a conservative estimation of the ultimate compressive strain in the absence of design pressure, and that the Canada standard expression be employed while the design pressure can not be ignored. Because the strain-based design process has not been proposed in the Chinese pipeline codes, the work of this paper can serve as a reference for the research in the relevant areas in present China.

Effects of Bending Moment and Torsion on the Internal Pressure Limit Load of Locally Thinned Pipes

Effects of Bending Moment and Torsion on the Burst Pressure of Locally Thinned Pipes

Evaluation of Torsion and Bending Collapse Moments for Pipes with Local Wall Thinning

Inclusion of Torsion with Bending and Pressure Loads for Pipes with Thin-Wall Regions

Effect of Torsion on Collapse Bending Moment for 24-Inch Diameter Schedule 80 Pipes with Wall Thinning

Technical Basis for Application of Collapse Moments for Locally Thinned Pipes Subjected to Torsion and Bending Proposed for ASME Section XI

Effects of Torsion on Equivalent Bending Moment for Limit Load and Epfm Circumferential Pipe Flaw Evaluations

Failure Experiments on Pipes with Local Wall Thinning Subjected to Multi-Axial Loads

Limit bending moment for pipes with two circumferential flaws under combined internal pressure and bending

Finite element analysis of the limit load of pipe bend with local wall-thinning defect under complex loads

Effect Of Pressure On Plastic Collapse Under The Combined Bending And Torsion Moments For Circumferentially Surface Flawed Pipes

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

A study of the ultimate compressive strain of local buckling in strain-based design of pipelines

Inclusion of Torsion Loads in Section Xi Flaw Evaluation Procedures for Pipes Containing Circumferential Planar Surface Crack-Like Flaws on the Basis of Limit Load Analysis

Effect of Torsion Moment on Failure Bending Moment for Circumferentially Cracked Pipe

Proposal for Inclusion of Torsion in Section XI Flaw Evaluation Procedures for Pipes Containing Surface Crack-Like Flaws

Collapse Loads for Circumferentially Through-Wall Cracked Pipes Subjected to Combined Torsion and Bending Moments

Failure Bending Stresses for Small Diameter Thick-Wall Pipes

The research on the critical loading path of thick-walled pipes under external pressure and cyclic bending

Prediction Method for Plastic Collapse of Circumferentially Cracked Pipes Subjected to Combined Bending and Torsion Moments

Allowable External Flaws and Acceptance Standards for High Toughness Ductile Pipes Subjected to Bending Moment and Internal Pressure