Abstract:The pipe wall thinning stress evaluation procedures in Code-Case N-597-2 [1] of the ASME Boiler and Pressure Vessel (B&PV) Code are essentially based on Construction Code [2] stress evaluation. Stresses in the hoop and the axial directions are evaluated separately to meet the Construction Code allowable stress. Using Construction Code rules for local pipe wall thinning stress evaluation in Class 2 & 3 piping may be too restrictive. An alternative approach is to use the limit loads of locally wall thinned pipe in conjunction with an appropriate Z-Factor and the structural factors of the ASME B&PV Section XI, Appendix C [3]. Such approach may require a combined effect of pressure, bending, axial load and torsion loads on locally thinned pipe. In this paper, the effects of bending moment and torsion on the internal pressure limit load of locally thinned straight pipes are investigated. Large strain finite element limit load analysis with elastic - perfectly plastic materials are performed for a parametric matrix of piping models with various pipe R/t ratios, flaw depths, axial and transverse flaw extents. Based on the results, the allowable pressure for axial flaws in C-5420 of the ASME B&PV Section XI, Appendix C [3] may be used for piping local wall thinning as an alternative evaluation procedure to the current minimum pipe wall thickness evaluation procedure in the Code Case N-597-2 [1].

Inclusion of Torsion with Bending and Pressure Loads for Pipes with Thin-Wall Regions

Evaluation of Torsion and Bending Collapse Moments for Pipes with Local Wall Thinning

Proposal for Inclusion of Torsion in Section XI Flaw Evaluation Procedures for Pipes Containing Surface Crack-Like Flaws

Technical Basis for Application of Collapse Moments for Locally Thinned Pipes Subjected to Torsion and Bending Proposed for ASME Section XI

Inclusion of Torsion Loads in Section Xi Flaw Evaluation Procedures for Pipes Containing Circumferential Planar Surface Crack-Like Flaws on the Basis of Limit Load Analysis

Effects of Bending Moment and Torsion on the Internal Pressure Limit Load of Locally Thinned Pipes

Effects of Bending Moment and Torsion on the Burst Pressure of Locally Thinned Pipes

Effect of Torsion on Collapse Bending Moment for 24-Inch Diameter Schedule 80 Pipes with Wall Thinning

Collapse Loads for Circumferentially Through-Wall Cracked Pipes Subjected to Combined Torsion and Bending Moments

Effects of Torsion on Equivalent Bending Moment for Limit Load and Epfm Circumferential Pipe Flaw Evaluations

Limit bending moment for pipes with two circumferential flaws under combined internal pressure and bending

Effect Of Pressure On Plastic Collapse Under The Combined Bending And Torsion Moments For Circumferentially Surface Flawed Pipes

Failure Bending Stresses for Small Diameter Thick-Wall Pipes

Prediction Method For Plastic Collapse Of Pipes Subjected To Combined Bending And Torsion Moments

Effect of Torsion Moment on Failure Bending Moment for Circumferentially Cracked Pipe

Failure Experiments on Pipes with Local Wall Thinning Subjected to Multi-Axial Loads

Prediction Method for Plastic Collapse of Circumferentially Cracked Pipes Subjected to Combined Bending and Torsion Moments

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Failure Bending Moment for Pipes with an Arbitrary-Shaped Circumferential Flaw

Finite element analysis of the limit load of pipe bend with local wall-thinning defect under complex loads

Buckling collapse of submarine thick-wall pipe under torque and hydraulic pressure based on vector form intrinsic finite element method