Abstract:Buckling damage is one of the biggest safety issues for subsea pipelines. Buckling behaviors of the subsea pipeline with integral buckle arrestors under external pressure are studied experimentally and numerically herein. Pressure chamber tests of four full-sized pipeline with identical thickness and different diameters are presented. An emerging vector form intrinsic finite element method (VFIFE) is introduced to simulate the whole buckling process both in dynamic and quasi-static cases, including local collapse, propagation, buckling prevention, and crossover. Numerical schemes for multifold nonlinearities and multithreaded computation are proposed and tested. Results of experiments and numerical simulations, as well as computations of the traditional finite element method and DNV specifications, are compared. Thusly it is indicated that the VFIFE model can accurately (within ± 1.5%) predict the buckling loads that initiate local collapse, propagation and crossover, and simulate the dynamic and quasi-static buckling modes for pipelines with practical range of diameter-to-thickness ratios greater than 20. For thick parts where integral arrestor with diameter-to-thickness ratios smaller than 20 located, the VFIFE thin shell element may underestimate the structural strength about 8.0%. The VFIFE can directly simulate the pipeline buckling behavior without special processing for the iterative calculation and the stiffness matrix convergence, and achieve the parallel efficiency over 90% for a common computer (12 threads, 4G RAM). Thus, the VFIFE can provide a new, practical and universal analytic strategy for subsea pipeline buckling analysis.

Buckling collapse of submarine thick-wall pipe under torque and hydraulic pressure based on vector form intrinsic finite element method

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Buckling Response of Offshore Pipelines under Combined Tension, Bending, and External Pressure

On Elastic-Plastic Collapse of Subsea Pipelines under External Hydrostatic Pressure and Denting Force

Local buckling of deepwater oil-gas pipeline under high hydrostatic pressure

On the Collapse Failure of Dented Pipes under Bending Moment and External Pressure

Buckling Response of Offshore Pipelines under Combined Tension and Bending

On Collapse Failure Analysis Of Subsea Corroded Sandwich Pipelines Under External Pressure

Buckle Propagation of Sandwich Pipes under External Pressure

Buckle Propagation Analysis of Deep-Water Petroleum Transmission Pipelines with Axial Tension

Collapse of Dented Subsea Pipelines under External Pressure

Analytical Solution of Pipeline Upheaval Buckling Considering Bi-Linear Axial Pipe-Soil Interaction Model

Local Buckling Characteristics of Stainless-Steel Polypropylene Deep-Sea Sandwich Pipe under Axial Tension and External Pressure

The research on the critical loading path of thick-walled pipes under external pressure and cyclic bending

Buckle Propagation of Offshore Pipelines under External Pressure

On the Collapse of Thick-Walled Pipes with Corrosion Defects under External Pressure

Buckling analysis of subsea pipeline with integral buckle arrestor using vector form intrinsic finite thin shell element

Confined Collapse of Unbonded Multi-Layer Pipe Subjected to External Pressure

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Pipeline Lateral Buckling Triggered by the Residual Curvature with Tri-Linear Axial Pipe-Soil Interaction

Collapse Of Tubes Under Combined Bending And Axial Compression Loads