Abstract:Sandwich pipes (SPs) composed of two concentrically steel tubes with a strain hardening cementitious composite (SHCC) filling core is a new concept designed for oil and gas transportation in deep waters. In this concept, the SHCC core is the most critical component that should withstand the combined loading of high hydrostatic pressure and bending moment. This paper proposes a particular concrete damage plasticity (CDP) model for the SHCC core based both on experimental data and on the continuum damage mechanics theory. The basic fundamentals of the CDP model can be divided into three major issues, namely, damage evolution, yield criterion, and plastic flow rule. For the damage evolution, two models of damage variables, under tension and compression, respectively, were built based on uniaxial experimental data available and the fracture energy theory. For the yield criterion, the parameters for the Lubliner model were fitted according to available experimental data from uniaxial and biaxial compressive tests. For the plastic flow rule, the dilation angle was deduced from the results of triaxial compressive tests combined with the Drucker-Prager type plastic flow rule. Finally, four-point bending tests were carried out on SHCC specimens and collapse tests were conducted on SP models to allow a correlation study between experimental data and results obtained from numerical simulations incorporating the proposed CDP model. The correlation between numerical and experimental results showed good agreement, demonstrating that the proposed CDP model can accurately reproduce the mechanical behavior and damage distribution experienced by an SHCC material.

Buckle Propagation of Sandwich Pipes under External Pressure

Empirical formula of buckle propagation pressure for sandwich pipes with polymer core material

Buckle Propagation Analysis of Deep-Water Petroleum Transmission Pipelines with Axial Tension

On Collapse Failure Analysis Of Subsea Corroded Sandwich Pipelines Under External Pressure

Buckle Propagation of Offshore Pipelines under External Pressure

Modeling the Interfacial De-Bonding Behavior Between Steel Wire and Adhesive

A Three-Dimensional Analytical Solution for Sandwich Pipe Systems under Linearly Varying External Pressures

Investigation of Interfacial Debonding Between Steel Wire and Adhesive Resin

Short-Term Mechanical Analysis of Polyethylene Pipe Reinforced by Winding Steel Wires Using Steel Wire Spiral Structural Finite Element Model

Local Buckling Characteristics of Stainless-Steel Polypropylene Deep-Sea Sandwich Pipe under Axial Tension and External Pressure

Steady Dynamic Buckle Propagation Simulation of Confined Pipelines under External Pressure by User Defined Elements in ABAQUS

Buckling Response of Offshore Pipelines under Combined Tension, Bending, and External Pressure

Local buckling of deepwater oil-gas pipeline under high hydrostatic pressure

Dynamic Response of a Slender Sandwich Pipe with a Metallic Foam Core Subjected to Low-Velocity Impact

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Buckling Response of Offshore Pipelines under Combined Tension and Bending

Experimentally based parameters applied to concrete damage plasticity model for strain hardening cementitious composite in sandwich pipes

On Elastic-Plastic Collapse of Subsea Pipelines under External Hydrostatic Pressure and Denting Force

Parametric study on the mechanical behavior of submarine pipeline for deepwater S-lay operation

Experimental and analytical evaluation of the performance of hybrid steel-CFRP pipelines at high external pressures

Buckling collapse of submarine thick-wall pipe under torque and hydraulic pressure based on vector form intrinsic finite element method