Abstract:Buckling damage is one of the biggest safety issues for subsea pipelines. Buckling behaviors of the subsea pipeline with integral buckle arrestors under external pressure are studied experimentally and numerically herein. Pressure chamber tests of four full-sized pipeline with identical thickness and different diameters are presented. An emerging vector form intrinsic finite element method (VFIFE) is introduced to simulate the whole buckling process both in dynamic and quasi-static cases, including local collapse, propagation, buckling prevention, and crossover. Numerical schemes for multifold nonlinearities and multithreaded computation are proposed and tested. Results of experiments and numerical simulations, as well as computations of the traditional finite element method and DNV specifications, are compared. Thusly it is indicated that the VFIFE model can accurately (within ± 1.5%) predict the buckling loads that initiate local collapse, propagation and crossover, and simulate the dynamic and quasi-static buckling modes for pipelines with practical range of diameter-to-thickness ratios greater than 20. For thick parts where integral arrestor with diameter-to-thickness ratios smaller than 20 located, the VFIFE thin shell element may underestimate the structural strength about 8.0%. The VFIFE can directly simulate the pipeline buckling behavior without special processing for the iterative calculation and the stiffness matrix convergence, and achieve the parallel efficiency over 90% for a common computer (12 threads, 4G RAM). Thus, the VFIFE can provide a new, practical and universal analytic strategy for subsea pipeline buckling analysis.

Steady Dynamic Buckle Propagation Simulation of Confined Pipelines under External Pressure by User Defined Elements in ABAQUS

Buckle Propagation Analysis of Deep-Water Petroleum Transmission Pipelines with Axial Tension

Buckle Propagation of Sandwich Pipes under External Pressure

Transient Simulation of Dynamic Buckle Propagation of a Shallow Cylinder under External Pressure with Damping

Dynamic Analysis of Pipeline Lifting Operations for Different Current Velocities and Wave Heights

Elasto-plastic Solution for Tunnelling-Induced Nonlinear Responses of Overlying Jointed Pipelines in Sand

Assessment Model of Pipe–soil Interaction During Large-Amplitude Lateral Displacements for Deep-Water Pipelines

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Buckling Response of Offshore Pipelines under Combined Tension, Bending, and External Pressure

Pipeline Lateral Buckling Triggered by the Residual Curvature with Tri-Linear Axial Pipe-Soil Interaction

Buckle Propagation of Offshore Pipelines under External Pressure

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Numerical Modelling of Pipe-Soil Interaction for Marine Pipelines in Sandy Seabed Subjected to Wave Loadings

Buckling Response of Offshore Pipelines under Combined Tension and Bending

Analytical Solution of Pipeline Upheaval Buckling Considering Bi-Linear Axial Pipe-Soil Interaction Model

Lateral Buckling of Subsea Pipelines Triggered by Combined Sleeper and Distributed Buoyancy Section

On Elastic-Plastic Collapse of Subsea Pipelines under External Hydrostatic Pressure and Denting Force

Buckling analysis of subsea pipeline with integral buckle arrestor using vector form intrinsic finite thin shell element

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Local buckling of deepwater oil-gas pipeline under high hydrostatic pressure

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes