Abstract:The as-laid embedment is a key design element of deep-water pipelines, as it significantly affects the longitudinal and transverse pipe-soil interaction and thermal insulation. Due to the small-amplitude oscillations driven by the sea state as well as lay vessel motions, the as-laid embedment is significantly greater than the predictions derived from static penetration analyses. This paper presents a numerical study into the cyclic embedment behavior of deep-water pipelines in soft clay using a recently developed sequential limit analysis (SLA) technique. It directly models the evolution of model geometry and material properties through a consecutive series of small displacement analyses and incorporates the effect of strain softening and strain rate on soil strength. A rigid plane-strain pipe section is pushed-in-place and then subjected to small-amplitude cyclic lateral displacements, with an accumulated lateral pipe displacement of up to 60 diameters. Careful comparisons between the numerical results with published centrifuge data are provided to demonstrate the robustness of SLA, in terms of pipe invert trajectory and soil resistance, followed by an extensive parametric study investigating the effect of strain rate, strain softening, oscillation amplitude, and loading history. More detailed aspects of the cyclic loading behavior are discussed with reference to soil failure mechanisms and bearing capacity yield envelopes. A strong correlation between accumulated lateral pipe displacement and pipe embedment is identified, regardless of the varying oscillation amplitudes, and soil buoyancy is found to play the most significant role in determining the final pipe embedment. The present study aims to assist the development of a macro-element plasticity pipe-soil model that can be incorporated into simplified three-dimensional (3D) pipeline-seabed models, as well as to promote the application of SLA to model complex large-displacement pipe-soil interaction problems.

Assessment Model of Pipe–soil Interaction During Large-Amplitude Lateral Displacements for Deep-Water Pipelines

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Modeling Cyclic Embedment of Deep-Water Pipelines Using Large Displacement Limit Analysis

Numerical Modelling of Pipe-Soil Interaction for Marine Pipelines in Sandy Seabed Subjected to Wave Loadings

Elasto-plastic Solution for Tunnelling-Induced Nonlinear Responses of Overlying Jointed Pipelines in Sand

An analytical solution for landslide impact on buried continuous pipelines

Analytical Analysis of Pipeline–soil Interaction During J-lay on a Plastic Seabed with Bearing Resistance Proportional to Depth

Pipeline Lateral Buckling Triggered by the Residual Curvature with Tri-Linear Axial Pipe-Soil Interaction

Large-Deformation Finite Element Analysis Of Pipe Penetration And Large-Amplitude Lateral Displacement

Analytical Solution of Pipeline Upheaval Buckling Considering Bi-Linear Axial Pipe-Soil Interaction Model

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Responses of different nonlinear pipe-soil interaction models in dynamic cycling of riser in the touchdown zone

Buckling Response of Offshore Pipelines under Combined Tension and Bending

ANALYSIS OF STABILITY FAILURE FOR PIPELINE DURING LONG DISTANCE PIPE JACKING

A Refined Analytical Model for Landslide or Debris Flow Impact on Pipelines – Part II: Embedded Pipelines

Elastoplastic Pipe-Soil Interaction Analyses of Partially-Supported Jointed Water Mains

Analytical Solution for Upheaval Buckling of Shallow Buried Pipelines in Inclined Cohesionless Soil

Numerical model for pipeline laying during S-lay

Prediction for Response of Adjacent Pipelines Induced by Pipe Jacking Construction

Modeling Pipe-Soil Interaction under Vertical Downward Relative Offset Using B-spline Material Point Method

Pipe-Soil Interaction Model For Current-Induced Pipeline Instability On A Sloping Sandy Seabed