Abstract:When a flaw is detected in austenitic piping during in-service inspection, the limit load criterion given in the codes such as JSME Rules on Fitness-for-Service for Nuclear Power Plants or ASME Boiler and Pressure Vessel Code Section XI can be applied to evaluate the structural integrity of the piping. Considering that a cracked pipe is subjected to tensile load and/or bending moment, limit load (moment) for ductile material can be well predicted based on the net-section-collapse criterion derived from the equilibrium of the admissible stress distribution on the ligament of the cracked section. Actual piping is generally subjected to combined tensile, bending, and torsional loadings, however, a methodology to evaluate limit moment for torsion is not established due to the inadequacy of experimental validation. In this study, fracture tests for circumferentially cracked cylinders subjected to torsional moment were conducted. Tested material was austenitic stainless steel, and the shape and size of crack were variable. Experimental maximum moments were compared with the limit moments, which were evaluated based on the concept of the net-section-collapse criterion for torsional moment. The maximum moments could be conservatively predicted by the net-section-collapse criterion. In addition, an innovative test method was developed to conduct torsional tests using a pair of Charpy V-notch specimens and a conventional test machine. The adequacy of the replacement of cracks with machined notches for ductile materials under torsional loading was investigated through the comparison of the fracture behavior obtained from notched and precracked Charpy specimens. The developed method could be an alternative test method for torsional moment.

Prediction Method for Plastic Collapse of Circumferentially Cracked Pipes Subjected to Combined Bending and Torsion Moments

Prediction Method For Plastic Collapse Of Pipes Subjected To Combined Bending And Torsion Moments

Effect Of Pressure On Plastic Collapse Under The Combined Bending And Torsion Moments For Circumferentially Surface Flawed Pipes

Effect of Torsion Moment on Failure Bending Moment for Circumferentially Cracked Pipe

Experimental Investigation of Failure Estimation Method for Circumferentially Cracked Pipes Subjected to Combined Bending and Torsion Moments

Collapse Loads for Circumferentially Through-Wall Cracked Pipes Subjected to Combined Torsion and Bending Moments

Experimental Study on Failure Estimation Method for Circumferentially Cracked Pipes Subjected to Multi-Axial Loads

ICONE19-43138 Prediction of Failure Bending Moment for a Pipe Containing Multiple Circumferential Cracks with Complex Shapes

Experimental Investigation on the Failure Estimation Method of Cracked Cylinders Subjected to Multi-Axial Loads

Evaluation of Torsion and Bending Collapse Moments for Pipes with Local Wall Thinning

Plastic Collapse Stresses for Pipes with Inner and Outer Circumferential Cracks

Prediction of Collapse Stress for Pipes with Arbitrary Multiple Circumferential Surface Flaws

ICONE19-43356 NET-SECTION-COLLAPSE OF CIRCUMFERENTIALLY CRACKED CYLINDERS SUBJECTED TO TORSIONAL MOMENT

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

PLASTIC COLLAPSE STRESSES FOR THICK WALL PIPES WITH EXTERNAL CRACKS

Technical Basis for Application of Collapse Moments for Locally Thinned Pipes Subjected to Torsion and Bending Proposed for ASME Section XI

Prediction of Failure Bending Moment for a Pipe with an Arbitrary-Shaped Circumferential Flaw

Prediction of Plastic Collapse Moments for Circumferential Cracked Pipes with Weld Overlays

Failure Bending Moment of Pipes Containing Multiple Circumferential Flaws with Complex Shape

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Application Scope of Limit Load Criterion for Ductile Material Pipes with Circumferentially External Cracks