Abstract:Flaws due to stress corrosion cracking have been detected in stainless steel or nickel-based alloy dissimilar metal weld joints of piping systems in nuclear power plants. Generally, stainless steel and nickel-based alloy are ductile materials with high toughness, and the failure mode of flawed pipes made of ductile materials is expected to be net-section plastic collapse. Failure bending moment of a ductile pipe containing a circumferential flaw is predicted using the net-section stress approach according to ASME Code Section XI as a limit load criterion. However, in the current code, the failure bending moment can only be adopted for a pipe containing a single circumferential flaw with constant depth, although many flaws detected actually are multiple flaws, and the flaw shapes are generally complex. In this study, a failure estimation method for pipes containing multiple circumferential flaws with complex shapes was proposed. Furthermore, failure experiments were performed for 8 inch diameter Schedule 80 stainless steel pipes containing two circular circumferential flaws. The failure bending moments obtained from the experiments were compared with the estimated results. Based on the experimental results, it was concluded that the proposed failure estimation method satisfactorily represents the failure behavior of the pipes and can be applied in engineering application.

Prediction of Collapse Stress for Pipes with Arbitrary Multiple Circumferential Surface Flaws

Limit Load Estimation Method for Pipe with an Arbitrary Shaped Circumferential Surface Flaw

Fracture Estimation Method for Pipe with Multiple Circumferential Surface Flaws

Experimental Investigation on the Limit Load Estimation Method for Pipes Containing a Circumferential Surface Flaw with Complicated Shape

Experimental Verification on Limit Load Estimation Method for Pipes with an Arbitrary Shaped Circumferential Surface Flaw

Prediction of Failure Bending Moment for a Pipe with an Arbitrary-Shaped Circumferential Flaw

Failure Bending Moment for Pipes with an Arbitrary-Shaped Circumferential Flaw

Failure Bending Moment of Pipes Containing Multiple Circumferential Flaws with Complex Shape

ICONE19-43138 Prediction of Failure Bending Moment for a Pipe Containing Multiple Circumferential Cracks with Complex Shapes

Prediction Method for Plastic Collapse of Circumferentially Cracked Pipes Subjected to Combined Bending and Torsion Moments

Plastic Collapse Stresses for Pipes With Circumferential Twin Flaws Using Combination Rules

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Prediction Method For Plastic Collapse Of Pipes Subjected To Combined Bending And Torsion Moments

Empirical Correction Factor to Estimate the Plastic Collapse Bending Moment of Pipes with Circumferential Surface Flaw

Plastic Collapse Stresses Based on Flaw Combination Rules for Pipes Containing Two Circumferential Similar Flaws

Effect Of Pressure On Plastic Collapse Under The Combined Bending And Torsion Moments For Circumferentially Surface Flawed Pipes

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Experimental Investigation of Failure Estimation Method for Circumferentially Cracked Pipes Subjected to Combined Bending and Torsion Moments

Experimental Study on Failure Estimation Method for Circumferentially Cracked Pipes Subjected to Multi-Axial Loads

Experimental Investigation on the Failure Estimation Method of Cracked Cylinders Subjected to Multi-Axial Loads