Abstract:The stress-based criteria have long been adopted as the major guideline in the design of line pipes, but for those under the displacement control, such as pipelines in seismic regions, landslide areas and subsea environment, the stress-based criteria tend to be relatively conservative, instead the strain-based criteria will be more economic and reasonable to use in the pipe design. Hence, the strain-based design methods in different international standards were summarized and compared, as well as their applicable conditions. In view of the different formulas of the ultimate compressive strain of local buckling in the standards of Norway, Canada, etc., calculations of the ultimate compressive strain were conducted under different radius-thickness ratios and design pressures. It is revealed that the Canadian standard expression and Japanese SUZUKI formula are more conservative. To meet the demand of real engineering application, it was suggested that 0.3 t/D (t refers to the pipe wall thickness; D refers to the external diameter of pipes) be adopted as a conservative estimation of the ultimate compressive strain in the absence of design pressure, and that the Canada standard expression be employed while the design pressure can not be ignored. Because the strain-based design process has not been proposed in the Chinese pipeline codes, the work of this paper can serve as a reference for the research in the relevant areas in present China.

Numerical Limit Load Analysis of Pipelines with Local Wall-Thinning

A Simplified Analytical Solution of Pipeline Response under Normal Faulting

FINITE ELEMENT ANALYSIS OF PLASTIC LIMIT LOADS OF LOCALLY THINNED ELBOWS UNDER INTERNAL PRESSURE AND IN-PLANE BENDING MOMENT

Finite element analysis of the limit load of pipe bend with local wall-thinning defect under complex loads

A study of the ultimate compressive strain of local buckling in strain-based design of pipelines

Plastic Limit Analysis of Pipelines with Part-Through Slots

Limit analysis of equal-diameter piping branch junctions with local wall-thinning under internal pressure

Limit Analysis for Piping Branch Junctions with Local Wall-Thinning under Pressure

Strength Differential Effect and Influence of Strength Criterion on Burst Pressure of Thin-Walled Pipelines

Plastic Collapse Analysis of Thin-Walled Pipes Based on Unified Yield Criterion

Plastic Limit Load Analysis of Defective Pipelines

A Numerical Study on the High-Velocity Impact Behavior of Pressure Pipes

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

On the Limit Analysis of Defective Pipelines under Complex Loadings

PLASTIC LIMIT LOAD ANALYSIS OF T-JUNCTIONS OF PIPING WITH LOCAL WALL-THINNINGS UNDER OUT-OF-PLANE MOMENT

Practical Computation of the Plastic Collapse Limit of Defective Pipelines under Complex Loadings

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Failure Experiments on Pipes with Local Wall Thinning Subjected to Multi-Axial Loads

Plastic Limit Analysis of Defective Pipelines under Complex Loads

Safety analysis of pressure piping containing incomplete penetration under combined loads

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings