Abstract:An approximate analysis approach for plastic limit load of piping branch junctions, by means of the relationship of the internal force between the main and branch pipes around intersection line, is presented in this work. The approach is built on the following process: based on the external force equilibrium condition, an equation between the limit load and internal force of the branch pipe around intersection is derived firstly. And then, taking this internal force as an external force acting on the intersection of the main pipe, the approximate solution of the internal force around the intersection on the main pipe is given as a function of the limit load. Finally, referring to the von-Mises yield criterion, the limit load of component with two intersecting cylindrical shells is then obtained. In use of the proposed approach, a closed form of limit load solution for piping branch junction under in-plane moment is developed. Finite element (FE) models of the idealized piping branch junction with various diameters and wall-thickness of the main and branch pipes were analyzed by using nonlinear FE software. The limit loads from FE analysis, from the proposed solution and six experimental data of real piping branch junctions are compared. Overall good agreement between the different limit loads was observed which provides confidence in the use of the proposed formulae in practice.

An Analysis on the Safety Performance of the Combined Fittings of Straight Tees and Long Radius Elbows

Finite Element Analysis on the Mechanical Properties of the Combined Fittings With a Long Radius and Double Elbows

Study of plastic limit load of the combined fittings of double elbows under in-plane bending moment

Safety analysis of pressure piping containing incomplete penetration under combined loads

Mismatch effect on safety assessment of pressure pipe with incomplete penetration defect

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

PLASTIC LIMIT LOAD OF PRESSURIZED PIPING BRANCH JUNCTIONS UNDER COMBINED LOADINGS

Limit Load Interaction of Welded Piping Branch Junctions Subjected to Combined Internal Pressure and Bending

Finite Element-Based Limit Load of Piping Branch Junctions under Combined Loadings

Finite Element Analysis of Plastic Ultimate Load for Welded T Junction Pipe Subjected to Internal Pressure

Limit analysis of equal-diameter piping branch junctions with local wall-thinning under internal pressure

Numerical study of defect free elbows subjected to in-plane bending moment

PLASTIC LIMIT LOAD ANALYSIS OF T-JUNCTIONS OF PIPING WITH LOCAL WALL-THINNINGS UNDER OUT-OF-PLANE MOMENT

Safety Testing and Analysis of the Header of the Drawn Boiler with a Small Diameter and a Large Wall Thickness

Stress Analysis and Evaluation of Special Shape Pressure Pipe

Limit Analysis for Piping Branch Junctions with Local Wall-Thinning under Pressure

Limit load analysis for the piping branch junctions under in-plane moment

Plastic Limit Load of Welding Piping Tees Under the Action of the In-Plane Bending Moment

Evaluation of plastic limit load of piping branch junctions subjected to out-of-plane moment loadings