Abstract:Elbows are the type of components widely used in a piping system, and are particularly important from the point of view of structural behaviour. In practice, the existence of cracks in excess of the defect limit cannot be excluded. So it is very important to know the effect of cracks on limit loads of elbows for integrity assessment of the piping system. The existing closed-form limit loads for axial cracked elbows under in-plane bending moment are either too conservative or inadequate, therefore, the present studies focused on limit loads of elbows with axial cracks and the crack configurations were assumed to be constant-depth rectangle, subjected to in plane opening and closing bending moments respectively. The crack-like defects were postulated to be in crown of elbows with different crack sizes. The limit loads and residual strength factors (RSFs) (ML/M0L )of cracked elbows with various ratios of t/rm and relative bending radius R/rm were investigated in detail, by using of three-dimensional (3D) non-linear finite element (FE) analyses, assuming elastic perfectly-plastic material behaviour and taking geometric nonlinearity into account. The non-linear finite element (FE) analyses indicate that under the open/close bending modes, elbows exhibit different behaviour obviously at the elastic plastic states. The results from comprehensive parametric studies indicate that the limit loads of cracked elbows may reduce with the increasing of crack length, and these trends are more serious for long radius elbows. Generally speaking, the thickness-radius ratio t/rm of elbow has insignificant effects on RSFs. Based on extensive limit load numeric data and comprehensive parametric studies, the revised closed form equations for cracked elbows involving effect of tangent pipes, were established. The results can be used for Fitness-For-Service assessment of elbow.

Limit and Shakedown Analysis of 45-Degree Piping Elbows under Internal Pressure and In-Plane Bending

SHAKEDOWN AND LIMIT ANALYSIS OF KINEMATIC HARDENING PIPING ELBOWS UNDER INNER PRESSURE AND BENDING MOMENTS

Shakedown, Ratchet, and Limit Analyses of 90° Back-to-back Pipe Bends under Cyclic In-Plane Opening Bending and Steady Internal Pressure

Study of plastic limit load of the combined fittings of double elbows under in-plane bending moment

Shakedown Limit of Elbow Pipe under Coupled Cyclic Thermal-Mechanical Loading Based on the LMM

Shakedown and limit analysis of 90° pipe bends under internal pressure, cyclic in-plane bending and cyclic thermal loading

Cyclic Plasticity Behavior of 90° Back-to-Back Pipe Bends under Cyclic Bending and Steady Pressure

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Safety analysis of pressure piping containing incomplete penetration under combined loads

Comprehensive Numerical Study on Shakedown and Ratchetting Behaviours of a Deteriorated 90° Back-to-back Pipe Bends

Finite Element Analysis on the Mechanical Properties of the Combined Fittings With a Long Radius and Double Elbows

Investigating the Effects of Cyclic Thermo-Mechanical Loading on Cyclic Plastic Behavior of a Ninety-Degree Back-to-Back Pipe Bend System

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Plastic Collapse Loads for Piping Elbows under In-plane Open/Close Bending Moment

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

PLASTIC LIMIT LOAD EQUATIONS OF DEFECT FREE ELBOWS SUBJECTED TO IN-PLANE BENDING MOMENT

Shakedown Analysis of a Torispherical Head with a Piping Nozzle under Combined Loads by the Stress Compensation Method

Limit loads for part-through surface axially cracked elbows under internal pressure

Numerical study of defect free elbows subjected to in-plane bending moment

Limit Loads for Cracked Elbows under In-Plane Bending Moment

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation