Abstract:Ellipsoidal and torispherical heads, whose geometric shapes are close, are usually used as end closures of internally pressurized vessels. In pressure vessel codes, for example, ASME BPVC Section VIII, ellipsoidal heads are designed as torispherical heads using geometric equivalency approaches. However, the difference between ellipsoidal and equivalent torispherical heads has not been studied in detail. In this paper, we first investigate the shape deviation between the two types of heads. Then we compare the elasticplastic behaviors between ellipsoidal and equivalent torispherical heads as well as their failure modes, i.e., buckling and plastic collapse. It is found that ellipsoidal heads have more buckling resistance than equivalent torispherical heads, indicating that the current design rules for buckling failure based on the geometric equivalency approaches result in uneconomical design. Nevertheless, the shape deviation has little effect on plastic collapse pressures of ellipsoidal and equivalent torispherical heads, showing that the geometric equivalency approaches are applicablefor such heads thatfail by plastic collapse (bursting). In addition, the experimental and numerical results show that such heads experience geometric strengthening. The FE method considering the effect of geometric strengthening provides a good prediction about plastic collapse (bursting) pressure. However, the current design equation for bursting does not consider the effect ofgeometric strengthening, also leading to uneconomical design. Therefore, in order to avoid uneconomical design, we recommend that (1) with respect to the buckling of ellipsoidal heads, a new design equation be proposed rather than implementing the geometric equivalency approaches, and (2) the current design equation for bursting be deleted, and a new design equation, considering the effect of geometric strengthening, be proposed for the bursting of ellipsoidal and torispherical heads subjected to internal pressure.

BURST FAILURE ANALYSIS OF PLASTIC ANISOTROPIC THICK-WALLED CYLINDRICAL VESSELS SUBJECTED TO COMBINED PRESSURES

Burst Pressure of Pipelines with Plastic Anisotropy under Combined Internal and External Pressures

Theoretical Assessment of Burst Failure of Internally Pressurized Defect-Free Pipelines with Plastic Anisotropy

Strength Differential Effect and Influence of Strength Criterion on Burst Pressure of Thin-Walled Pipelines

Investigation on Plastic Instability of a Thin-Walled Anisotropic Cylindrical Shell Subjected to Internal Impulsive Loading

Plastic Collapse Analysis of Thin-Walled Pipes Based on Unified Yield Criterion

Unified Plastic Limit Solution for Thick-Walled Cylinder with Size Effect

Study on Burst Pressure of Type Ⅳ Hydrogen Storage Cylinder Based on Progressive Failure Analysis

Estimation of burst pressure of pipeline using twin-shear stress yield criterion

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Dynamic Burst Pressure of Cylindrical Explosion Containment Vessels

Failure phenomena in metallic and metal-lined polymer composite pressure vessels for aerospace applications

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

A novel plastic limit load solution for the orthotropic cylindrical shell with nozzle under internal pressure

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

Effect of the Y/T on the Burst Pressure for Corroded Pipelines with High Strength

COMPARISON OF ELLIPSOIDAL AND EQUIVALENT TORISPHERICAL HEADS UNDER INTERNAL PRESSURE: BUCKLING, PLASTIC COLLAPSE AND DESIGN RULES

Investigation on Short-Term Burst Pressure of Plastic Pipes Reinforced by Cross Helically Wound Steel Wires

Micromechanics-based Burst Failure Analysis of Composite Vessel Used for Hydrogen Storage

Bursting problem of filament wound composite pressure vessels

Analysis on the ultimate bearing capacity of plastic pipe reinforced by cross-helically winding steel wires under internal pressure