Abstract:The composite hydrogen storage vessel is directly subj ected to both high pressure and temperature load during the hydrogen charging process,which contributes to the complicated failure mechanisms of the vessel structure.A micromechanics-based progressive failure analysis strategy was presented to study the complex failure behaviors of the composite vessel under ther-mo-mechanical loadings.An effective finite element model was developed based on the integration of micromechanics of failure (MMF)theory and material property degradation method (MPDM), where the MMF was used to predict the failure initiation at the constituent level and the MPDM was employed to account for the post failure behavior of the damaged materials.In addition,the micromechanics analysis of a typical unit cell model was performed in order to obtain the interac-tion information which bridged the micro-level and macro-level analysis.This micromechanics-based approach was implemented by a user-material subroutine (UMAT)in ABAQUS.Different failure patterns were obtained and the ultimate load-bearing ability of the vessel was predicted. The predictions of the model were also compared with experiments and reasonably good agree-ments were obtained.This work provides theoretical guidance for the safety and economical design as well as practical application of the composite vessel in fields of hydrogen fuel cell vehicles.

Bursting problem of filament wound composite pressure vessels

Prediction of composite pressure vessel dome contour and strength analysis based on a new fiber thickness calculation method

Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Mechanical Analysis of Carbon Fiber Filament Wound Hydrogen Storage Vessel with Aluminum Alloy Liner

Optimal Winding Conditions of Flat Steel Ribbon Wound Pressure Vessels with Controllable Stresses

BURST FAILURE ANALYSIS OF PLASTIC ANISOTROPIC THICK-WALLED CYLINDRICAL VESSELS SUBJECTED TO COMBINED PRESSURES

Experimental Analysis on Residual Performance of Used 70 MPa Type IV Composite Pressure Vessels

Analysis of stress and strength of filament wound solid rocket motor case

Micromechanics-based Burst Failure Analysis of Composite Vessel Used for Hydrogen Storage

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Study on Burst Pressure of Type Ⅳ Hydrogen Storage Cylinder Based on Progressive Failure Analysis

Finite Element Analysis of Burst Pressure of Composite Hydrogen Storage Vessels

Progressive Failure Analysis and Burst Mode Study of Type IV Composite Vessels

Prediction of Residual Burst Strength for Composite Pressure Vessels after Low Velocity Impact

A numerical and experimental study on mechanical behaviours of type III composite vessels with different lay-up sequences

Strength and Failure Analysis of Fiber-Wound Composite Gas Cylinder via Numerical Simulation

Dynamic Burst Pressure of Cylindrical Explosion Containment Vessels

Theoretical Assessment of Burst Failure of Internally Pressurized Defect-Free Pipelines with Plastic Anisotropy

Burst pressure prediction of cord-rubber composite structures using global–local nonlinear finite element analysis

Burst Pressure Prediction and Structure Reliability Analysis of Composite Overwrapped Cylinder