Abstract:Polyethylene pipe reinforced by winding steel wires (PSP) is new type of polymer-matrix composite pipe, which is widely used in petroleum, chemical engineering, and water supply, etc. PSP is composed of a thermoplastic core pipe(HDPE), an outer cover layer(HDPE), and steel wire skeleton sandwiched in the middle. The steel wire skeleton is formed by crossly winding steel wires integrated with HDPE matrix by cohesive resin. In traditional analysis models of PSP, components of PSP were considered linear elastic, and steel wire skeleton was assumed to be orthotropic composite layer based on the classical laminated plate theory. Although achieving good results in engineering applications, traditional models neglected the material nonlinearity of steel wires and HDPE matrix, which was significant to failure analysis. In the present paper, a new finite element model was constructed using commercial software ABAQUS[1], based on the actual steel wire spiral structure of PSP. Steel wires and HDPE matrix were modeled separately, which were both represented by solid elements, and the interaction between steel wires and HDPE was characterized by tie interaction. Experimental result of short-term burst pressure of PSP was used to validate the nonlinear model. Compared with the experimental result, the calculation results of the nonlinear model agreed well. Furthermore, the effect of the nonlinear material property of components on the calculation results were investigated, and the short-term mechanical responses of PSP were determined and analyzed through the nonlinear model.

Burst pressure prediction of cord-rubber composite structures using global–local nonlinear finite element analysis

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Modelling of Concrete-Filled Filament-Wound FRP Confining Tubes Considering Nonlinear Biaxial Tube Behavior

Short-Term Mechanical Analysis of Polyethylene Pipe Reinforced by Winding Steel Wires Using Steel Wire Spiral Structural Finite Element Model

Numerical Study of CFRP-Bonded Pressure Pipes Subject to Impact Load

Bursting problem of filament wound composite pressure vessels

Micromechanics-based Burst Failure Analysis of Composite Vessel Used for Hydrogen Storage

Finite Element Analysis of Burst Pressure of Composite Hydrogen Storage Vessels

Prediction of Residual Burst Strength for Composite Pressure Vessels after Low Velocity Impact

Finite element analysis of self-tensioning and bursting of 210 L carbon fiber fully wound hydrogen storage cylinders

Progressive Failure Analysis and Burst Mode Study of Type IV Composite Vessels

Theoretical Modeling Of Steel Strip Reinforced Flexible Pipe With Swaging End Fitting By Taking Into Account Stress Concentration Effect

Progressive damage analysis for multiscale modelling of composite pressure vessels based on Puck failure criterion

Finite Element Modelling on the Mechanical Behaviour of Marine Bonded Composite Hose (MBCH) under Burst and Collapse

Nonlinear Failure Analysis on Pressurized Cylindrical Shell Using Finite Element Method: Comparison of Theoretical and Experimental Data

Progressive failure analysis and taguchi-based optimisation of filament-wound composite tubes subjected to internal pressure using continuum damage mechanics approach

Burst Pressure Prediction and Structure Reliability Analysis of Composite Overwrapped Cylinder

Numerical and Experimental Investigation of the Burst Resistance of Glass-Fiber Thermoplastic Composite Pipes under Internal Pressure

Strength and Failure Analysis of Fiber-Wound Composite Gas Cylinder via Numerical Simulation

Bursting failure modes of double carcass floating hose

Composite Pressure Vessel Failure Simulation Considering Spatial Variability