Abstract:The main load-bearing structure of submarines is the pressure shell. Shell failures are usually caused by high hydrostatic pressure and its own potential geometric imperfections. This paper proposes a cylindrical shell with a strong corrugated stiffening structure. Two theoretically geometrically identical shells are fabricated using CNC machining to ensure the reproducibility and reasonableness of the results. Firstly, the point cloud data of all the geometric parameters of the corrugated pressure cylindrical shells were obtained using a 3D scanner. Geomagic Control X 3D inspection software was used to determine the geometric deviations of the shells. Geometric reconstruction was performed using Geomagic Design X reverse modeling software to capture potential imperfections of the shells. The aluminum shells were then welded and placed in the pressure chamber. Failure loads were obtained for all shells by constant water injection and pressurization. Considering the confined nature of the pressure chamber, a nonlinear finite element analysis of the corrugated pressure cylindrical shell was carried out using Abaqus/Riks, taking into account actual fabrication imperfections. Finally, the failure behavior of the shells under uniform external pressure was determined. The results show that both corrugated pressure cylindrical shells have high machining accuracy. The numerical simulation results of the critical buckling load of the corrugated pressure cylindrical shells were in good agreement with the test results. The corrugated structure has additional advantages in retarding the generation and expansion of shell surface defects. The equilibrium path of the corrugated pressure cylindrical shell can be maintained in a smooth and continuous state, showing stable buckling behavior. This study will provide new inspiration for the structural design and failure prediction of the submarine pressure shell.

Nonlinear Failure Analysis on Pressurized Cylindrical Shell Using Finite Element Method: Comparison of Theoretical and Experimental Data

Study on Burst Pressure of Type Ⅳ Hydrogen Storage Cylinder Based on Progressive Failure Analysis

BURST FAILURE ANALYSIS OF PLASTIC ANISOTROPIC THICK-WALLED CYLINDRICAL VESSELS SUBJECTED TO COMBINED PRESSURES

Investigation of Crack Propagation and Failure of Liquid-Filled Cylindrical Shells Damaged in High-Pressure Environments

Simulation of the Deformation and Failure Characteristics of a Cylinder Shell under Internal Explosion

Theoretical Assessment of Burst Failure of Internally Pressurized Defect-Free Pipelines with Plastic Anisotropy

Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Finite Element Analysis of Tangential Rectangle Joint Pipe on the Shell of an Cyclone

Dynamic Burst Pressure of Cylindrical Explosion Containment Vessels

An Innovative Failure Criterion for Metal Cylindrical Shells under Explosive Loads

Experimental study on the failure modes of circumferentially corrugated cylinders under external hydrostatic pressure

Ultimate state assessment of medium-thick composite cylindrical pressure shells based on progressive damage

Failure Behavior of Corrugated Pressure Cylindrical Shells with Variable Wall Thickness under Uniform External Pressure

Collapse of helical cylindrical shells subjected to external hydrostatic pressure

Burst Pressure Prediction and Structure Reliability Analysis of Composite Overwrapped Cylinder

Progressive Failure Analysis and Burst Mode Study of Type IV Composite Vessels

Finite element analysis of self-tensioning and bursting of 210 L carbon fiber fully wound hydrogen storage cylinders

Failure Analysis for Cylindrical Explosion Containment Vessels

EXPERIMENTAL INVESTIGATION ON LIMIT PRESSURE OF ORTHOGONALLY INTERSECTING CYLINDRICAL SHELLS WITH DIFFERENT DIAMETERS

Autofrettage and Shakedown Analyses of an Internally Pressurized Thick-Walled Spherical Shell Based on Two Strain Gradient Plasticity Solutions