Abstract:For cylindrical shells under axial compression, the essence of initial geometric imperfections is the superposition of local out-of-plane deformations of various forms, which may facilitate the development of buckling deformations, thus leading to a significant knockdown of the load-carrying capacity. It is very challenging for existing methods to provide an accurate prediction of the lower bound on a load-carrying capacity before the structure is fabricated. Therefore, it is crucial to find a type of assumed imperfection that will allow us to approximate lower bounds for shells in the design stage. Five 1-m-diameter unstiffened shells, termed W1-W5, are designed, analysed and tested. The measured imperfection approach, single-perturbation load approach (SPLA), worst multiple-perturbation load approach (WMPLA), and a Combined Approach for measured imperfections and superimposed radial point load imperfections are compared with test results. The results show that the SPLA-based methods produce higher KDFs than the test results and are sensitive to the distribution of the measured imperfections. In contrast, the KDFs predicted by the WMPLA and the Combined Approach are similar to one another and very close to the test results. From the comparison results, it can preliminarily be concluded that the WMPLA is able to envelop the small- and large-amplitude measured imperfections, which has the potential to predict a rational lower bound on the buckling loads of unstiffened cylindrical shells. The WMPLA should be extended to the design of other types of thin-walled structures with caution, because the manufacturing signature may be distinctly changed for different processes, and the buckling tests of other types of structures would be carried out in future study.

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression

Design of Axially Loaded Isotropic Cylindrical Shells Using Multiple Perturbation Load Approach – Simulation and Validation

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Form of Circumferential Weld-Induced Imperfections for Tapered-Wall Cylindrical Shell Structures

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Buckling Test of Metallic Thin-Walled Cylindrical Shells under Non-Uniform Axial Compression Loads

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Buckling analyses of thin-walled cylindrical shells subjected to multi-region localized axial compression: Experimental and numerical study

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Buckling Analysis and Shape Optimization of Cylinder Shells with Holes under Axial Compression

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Experimental Validation of Cylindrical Shells under Axial Compression for Improved Knockdown Factors

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Buckling Analysis and Optimization of Thin-walled Stiffened Cylindrical Shell

An Experiential Optimization Design Method for Orthogonal Rib-Stiffened Thin Walled Cylindrical Shells under Axial Loading

Analytical Research on Dynamic Buckling of Thin Cylindrical Shells with Thickness Variation under Axial Pressure

Buckling of Quasi-Perfect Cylindrical Shell under Axial Compression: A Combined Experimental and Numerical Investigation

Buckling behaviors of thin-walled cylindrical shells under localized axial compression loads, Part 2: Numerical study