Abstract:：Buckling is one of the most important failure modes for thin-walled cylindrical shell structures under axial compression loads.Based on the fact that the load carrying capacity of thin-walled cylindrical shell structures under axial compression loads are very sensitive to initial imperfections, the theoretical, experimental and numerical research works done by domestic and foreign researchers for more than half a century in considering the influence of initial imperfections on the critical buckling load of axial loaded cylindrical shells are systematically reviewed.Researches have shown that two kinds of equivalent methods to consider the effects of initial imperfections have been established, namely, the deterministic approach based on numerical analysis and the non-deterministic approach under statistical probabilistic theory.Specifically, the former mainly focuses on the initial geometric imperfections, while the latter also includes non-traditional initial imperfections, such as material, thickness and loading imperfections, etc.These two methods have their own characteristics and advantages in predicting the axial load carrying capability of cylindrical shells and conducting buckling design.Compared with the test results, the highest prediction accuracy of the multiple perturbation load approach and single boundary perturbation approach can reach more than 90% and also has a certain safety margin simultaneously.Finally, some research direction and relevant urgent works in the future about the buckling problems of thin-walled cylindrical shell structures considering initial imperfection sensitivity are pointed out, which can provide some guides for related researches. Key words： thin-walled

Lower-bound axial buckling load prediction for isotropic cylindrical shells using probabilistic random perturbation load approach

Design of Axially Loaded Isotropic Cylindrical Shells Using Multiple Perturbation Load Approach – Simulation and Validation

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

NON-LINEAR STABILITY CRITICAL LOADS OF SINGLE-LAYER AND DOUBLE-LAYER RETICULATED SPHERICAL SHALLOW SHELLS BASED ON CONTINUUM ANALOGY METHOD

Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Fast buckling load numerical prediction method for imperfect shells under axial compression based on POD and vibration correlation technique

Buckling Test of Metallic Thin-Walled Cylindrical Shells under Non-Uniform Axial Compression Loads

Bucking Load Prediction of Sparsely Stiffened Cylindrical Shells via Non-destructive Probing Technique

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Buckling of cylindrical shells with general axisymmetric thickness imperfections under external pressure

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Knockdown factor of buckling load for axially compressed cylindrical shells: state of the art and new perspectives

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Dynamic Buckling of Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation under Time Dependent External Pressure

Buckling analyses of thin-walled cylindrical shells subjected to multi-region localized axial compression: Experimental and numerical study

A Gaussian process-driven worst realistic imperfection method for cylindrical shells by limited data