Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. The impact test of tubular components is usually carried out by way of drop hammer impact. In fact, in many ships' equipment, the form of load is often carried out by way of drop impact test. In this paper, the drop impact test is used to study the buckling of tubular structure under impact load, so as to make it closer to the impact form of components in actual ship structure. Firstly, the stress, strain, acceleration at each moment and the buckling deformation mode of the tubular member after the impact are obtained through the drop impact experiment, and then the impact process is analyzed. Secondly, the finite element method is used for numerical simulation of the impact process, and the accuracy of the finite element analysis results is verified by comparing with it. Thirdly, the finite element method proved to be effective and was used to simulate single and multiple drop impacts under more working conditions, and a large amount of data was obtained. Finally, according to the existing impact criteria based on the results of drop weight impact, it is applied to the drop impact process, and the accuracy of each impact criterion is analyzed and compared. This method makes up for the deficiency of the traditional experimental method of using falling weight to simulate impact, and provides a reference for the critical buckling condition of similar thin-walled cylindrical shells under impact.

Finite Element Analysis of Tangential Rectangle Joint Pipe on the Shell of an Cyclone

Form of Circumferential Weld-Induced Imperfections for Tapered-Wall Cylindrical Shell Structures

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Strength Differential Effect and Influence of Strength Criterion on Burst Pressure of Thin-Walled Pipelines

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Research Of Weld On Axial Buckling Stress Of Multilayer Combined Cylindrical Shells

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Finite Element Analysis on the Mechanical Properties of the Combined Fittings With a Long Radius and Double Elbows

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Effect of Weld on Axial Buckling of Cylindrical Shells

Quasi-static Numerical Simulation of Elephant-foot Buckling of Cylindrical Liquid Storage Tanks

Buckling collapse of submarine thick-wall pipe under torque and hydraulic pressure based on vector form intrinsic finite element method

Impact Experiment and Buckling Criterion Analysis of Thin-Walled Cylindrical Shells

Buckling Analysis of Ring-Stiffened Cylindrical Shells with Cutouts by Mixed Method of Finite Strip and Finite Element

Finite Element Analyses and Experiments on Welded Spherical Joints with Rectangular Tubes

Finite element analysis of the limit load of pipe bend with local wall-thinning defect under complex loads