Abstract:This study addresses the axial compressive performance of welded hollow spherical (WHS) joints with external triangular ribs. External triangular ribs are able to postpone the local buckling of the joint during axial loading, and thus strengthen the compressive capacity of it. A simplified analytical model is proposed to elucidate the stress distribution on the hollow sphere of axial-loaded WHS joints with external triangular ribs. Then a simplified solution for the yield strength of axial-loaded WHS joints is deduced based on the elastic thin shell theory. The simplified solution indicates that the yield strength of WHS joints with external triangular ribs can be expressed by a coefficient related to the specifications of the ribs and the joints multiply by that of WHS joints without external ribs. Compression tests on 6 full-scale specimens of WHS joints with varied configurations of triangular ribs are conducted. It shows that the failure mode and the strength enhancement of the specimens vary as the specification of the triangular ribs change, and the triangular ribs enhance the strength of the joints up to 77 %. A refined FE model is established and calibrated against the findings from the experiments. Parametric studies on the design parameters which may affect the compressive response of the WHS joints with triangular ribs are fully investigated. It is shown that the compressive yield strength of the joint rises with the increase of the number, height and thickness of the triangular ribs, and decreases with the increase of the angle-of-elevation of the triangular ribs. It is also shown that the effect of the ratio of the diameter of the sphere to that of the steel tube on the compressive yield strength of the joint is much lighter than the others, and deemed as negligible. Regression analysis on the experimental and numerical data is carried out to obtain a practical formula for the compressive capacity of WHS joints with external triangular ribs. This formula is incorporated with the previously developed formula for the compressive capacity of WHS joints with external trapezoidal ribs, to form a general formula applicable for WHS joints with either external triangular ribs or external trapezoidal ribs.

Finite Element Analyses and Experiments on Welded Spherical Joints with Rectangular Tubes

Elastic Finite Element Analyses and Experiment Research on Welded Spherical Joints with Square Hollow Sections

Load-carrying capacity of welded hollow spherical joints subject to combined planar tri-directional axial force and bending moment

Load-carrying Capacity and Practical Calculation Method of Welded Hollow Spherical Joints with Square Steel Tubes Subjected to Combined Axial Forces and Biaxial Bending Moments

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Load-carrying Capacity and Practical Calculation Method of Welded Hollow Spherical Joints Connected with Square Steel Tubes

Simplified theoretical solution and practical calculation method for welded hollow spherical joints of rectangular hollow section members

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

On compressive behavior of large welded hollow spherical joints with both internal and external stiffeners

Load-Carrying Capacity and Practical Calculation Method for Hollow Cylinder Joints Connected with H-Shaped Beams

EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS

Compressive Performance of Welded Hollow Spherical Joints with External Triangular Ribs

Experimental study and capacity analysis of double-tapered rectangular steel tubes

Experimental research and finite element analysis on tubular joints of Hangzhou East Railway Station

RIGIDITTY OF WELDED HOLLOW SPHERICAL JOINTS ON FINITE ELEMENT ANALYSIS PRECESION OF RETICULATED SHELLS

Experimental study of the static behavior of tubular N-joints

Experimental Investigation of Circular Steel Tubes with Tapered Ends Subjected to Bending,compression and Torsion

Theoretical and Experimental Study on Load-Carrying Capacity of Combined Members Consisted of Inner and Sleeved Tubes

Experimental Study on Welded Hollow Spherical Joints with Square Hollow Sections

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

Influence of welding residual stress on bending resistance of hollow spherical joints