Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Experimental research and finite element analysis on tubular joints of Hangzhou East Railway Station

Experimental study of the static behavior of tubular N-joints

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Bearing capacity of the special-shape cast steel joint for Shanghai South Railway Station

Experimental study of K-type joint of the concrete-filled rectangular steel tube truss

Research and design about the complex joints of Suzhou Railway Station

Finite Element Analyses and Experiments on Welded Spherical Joints with Rectangular Tubes

Experimental Study on Behavior of Steel Truss-CFST Column Joints in Hongqiao Station for High-Speed Railway

Research on the Performance of Concrete Oblique Intersecting Concrete Filled Steel Tubular Plane Joints

Numerical and Experimental Research of the Design Method of Plate-Insert Welded Tubular Joint

Nonlinear Analysis on Ultimate Flexural Bearing Capacity of the N-Shaped Steel Tubular Joints

Experimental and numerical studies of a new prefabricated steel frame joint without field-welding: Design and static performance

Study on bearing capacity of multiplanar column joints in steel tubular frame

Experimental study of type and Y-type joints of the concrete-fillled rectangular steel tube truss

Experimental Study And Finite Element Analysis For Overlapped Parallel Tubular K-Joints

EXPERIMENTAL STUDY OF COMPLEX MULTIPLANAR TUBULAR JOINTS

EXPERIMENT ON STATIC BEARING CAPACITY OF MULTI-PLANAR INTERNALLY STIFFENED CHS TUBULAR JOINTS

Experimental Research and Finite Element Analysis on Joints of Sun Valley Steel Structure for the Expo Axis Project

Investigation for Ultimate Bearing Capacity of Overlapped K-joints of Steel Tubulars

Behavior of the Welded Tubular Joint in Spatial Lattice Shell Structures