Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Experimental study and FEM analysis on mechanical behavior of a steel tubular joint with bolted connection subject to biaxial compression

Experimental study of the static behavior of tubular N-joints

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Ultimate Strength of the Circular Tubular X-joints

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Experimental Investigation of Circular Steel Tubes with Tapered Ends Subjected to Bending,compression and Torsion

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

02.05: Design of concrete-filled steel tubular longitudinal gusset plate connections

Experimental Investigation of Concrete-Filled Steel Tubular Longitudinal Gusset Plate Connections

Experimental study and theoretical analysis of ultimate strength of steel tubular K-joints of tall towers

EXPERIMENTAL STUDY AND THEORETICAL ANALYSIS OF ULTIMATE STRENGTH FOR STEEL TUBULAR JOINT OF TALL TOWERS

RESEARCH ON LOCAL BUCKLING OF DODECAGONAL SECTION DOUBLE SKINNED CONCRETE-FILLED STEEL TUBE SHORT COLUMN

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

Behavior of Axially Loaded Tubular X-Joints Using Bolted Connection: Mechanical Model and Validation

Concrete-Filled Steel and Steel Tubular T-Joints under Cyclic In-Plane Bending

A study on the stability bearing capacity of fastener-style tubular steel formwork-supports

Study on In-Plane Behavior of Thin-walled Concrete-filled Steel Tubular Gusset Plate T-joints

Experimental investigation on axial compression behaviour of cold-formed thick-walled steel tubes

Experimental Study On The Interactive Buckling Of Welded Section Steel Columns Under Axial Compression

Finite Element Analysis of Load-Carrying Properties of Flange-Plate Connections of Steel Tubular Structures under Bending Moment