Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

EXPERIMENTAL RESEARCH AND NONLINEAR FINITE ELEMENT ANALYSIS ON NEW TYPE JOINT BETWEEN COLUMN AND STEEL BEAM OF CONCRETE-FILLED RECTANGULAR STEEL TUBULAR

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Experimental Research of Concrete Filled Steel Tubular Column-Reinforced Concrete Ring Beam Interior Joints

Experimental Research and Nonlinear FEA on Seismic Behavior of Square Concrete-Filled Tubular Column to H-shape Steel Beam Connection

FEM Analysis on Seismic Behavior of a New-type Joint of CFST Column-RC Beam

EXPERIMENTAL STUDY ON SEISMIC BEHAVIOR OF JOINT OF CFST COLUMN-RC BEAM

Mechanical Behavior of Flat CFST Column to Steel Beam Joints under Reversed Cyclic Loading

Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading

The nonlinear analysis of joint of steel-concrete composite beam to CFST column

Experimental Research on New Type of Concrete-filled Steel Tubular Column Joint to RC Beam

Study on Joint of Concrete-filled Rectangular Tublar Column and H-shaped Steel Beam

Square Reinforced CFST Column to RC Beam Joint Subjected to Lateral Loading: an Investigation Using Finite Element Analysis

EXPERIMENTAL INVESTIGATION ON CYCLIC PERFORMANCE OF CFST COLUMN-RC BEAM JOINTS ENCLOSED BY REBARS

Research on Seismic Behavior of Special-Shaped CFST Column to H-section Steel Beam Joint

Nonlinear Finite Element Analysis of Steel-concrete Composite Beam to Concrete-filled Steel Tubular Column Joints

Experimental Study on Concrete Filled Steel Tubular Column-Reinforced Concrete Ring Flat Beam Joints

Finite Element Analysis of the New-type Concrete Filled Steel Tubular Column-beam Joint

Seismic Behavior of Exterior Through-Beam Joint Between Concrete-Filled Steel Tubular Columns and Reinforced Concrete Beams